Next time use an SD card much easier to transfer to a non defunct BBB.
On 10/26/2015 1:53 AM, Rick Mann wrote: >> On Oct 25, 2015, at 07:36 , Graham <gra...@flex-radio.com> wrote: >> >> I would think that your best bet (not the cheapest solution, but most likely >> to yield results fast), is to buy another good BBB, then give that new one >> and the bad one to someone that has BGA rework and re-balling capability, >> and move the eMMC from the bad one to the new one. If the old eMMC survived >> the "event", then it should come up immediately. >> I don't know if you could ask CircuitCo to do that for you. >> >> Since you can buy a new BBB for the price of one-half-hour of repair shop >> time, I doubt if it is worth recovering the rest of the abused BBB hardware, >> for anything other than very simple repairs. > Yeah, that seems like the best approach. I'll see if I can rebuild what I did > before doing all that, though. > > Thanks! > >> --- Graham >> >> == >> >> >> >> On Sunday, October 25, 2015 at 4:33:07 AM UTC-5, Rick M wrote: >> Like a complete asshole, I let bare solder wire drag over my powered board. >> It's dead. >> >> Is there any hope of getting it repaired, so that I may get at the contents >> of the eMMC? It holds a lot of my work the past month trying to get all my >> sh*t working with any 4.x kernel. I hate to start, well, not from scratch, >> but not have the record of where I left things. >> >> >> >> -- >> Rick Mann >> rm...@latencyzero.com >> >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.