Hello, Full disclosure, I know very very little about the Beagle Bone, and have never used anything like it before. I literally cannot be underestimated. Anyway.
Following instructions on this page, https://github.com/foosel/OctoPrint/wiki/Setup-BeagleBone-Black-Rev-C-(Jessie) I flashed an image to my beaglebone. Except I cannot get it to display anything. When I connect it to an ethernet cable it doesn't show up on the network. When I connect it to my laptop via mini it doesn't show up. (After installing the 64 bit drivers for it and following the instructions on this page https://www.mail-archive.com/beagleboard@googlegroups.com/msg04529.html I'm at a loss. I simply cannot find this device anyway I try and I'm becoming very frustrated. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.