Find the modprobe here: https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh
You've got to have it serve up an IP address if you don't want to manually configure: https://github.com/RobertCNelson/boot-scripts/blob/master/boot/autoconfigure_usb0.sh On Mon, Dec 7, 2015 at 2:42 AM, Mehmet Kurnaz <hmehmetkur...@gmail.com> wrote: > You need g_ether.ko module. You can check it is loaded. > > On Sun, Dec 6, 2015 at 7:44 PM, hllpc <valeria.murgia...@gmail.com> wrote: >> >> Same Issue here. >> >> Il giorno venerdì 30 ottobre 2015 18:13:55 UTC+1, Alex ha scritto: >>> >>> Hi, >>> >>> I am using ubuntu 14.04 (from Robert Nelson) with a custom 3.15.10-bone8 >>> kernel on Beaglebone Black. HDMI is disabled. >>> When I plug the board to a PC, Beaglebone powers up but the PC does not >>> recognize that a USB device is connected to it. I have installed the drivers >>> for network-over-USB which is recommended on Beagleboard.org/getting-started >>> too. Moreover, I cannot ssh into it using 192.168.7.2 eventhough I have set >>> up my /etc/network/interfaces. >>> ubuntu@arm $ ifconfig usb0 >>> usb0 Link encap:Ethernet HWaddr d2:56:2f:23:1d:e2 >>> inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 >>> UP BROADCAST MULTICAST MTU:1500 Metric:1 >>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:1000 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> >>> Is there some modules that I need to run or compile to Kernel to bring >>> the client USB up? How should I configure the linux to be seen by PC when >>> connected from mini USB? >>> Thanks for any help. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.