I concur with Robert. If you're just logging temperature, use a console image, and in fact, if you strip them down, you can get down to just above 100M with a reasonable amount of tools installed as well. ~160M including Nodejs, and express.
On Wed, Jan 6, 2016 at 12:56 PM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Wed, Jan 6, 2016 at 1:04 PM, <tim.li...@gmail.com> wrote: > > Hello, > > I have an old A5C board that I'm bringing up for a temperature logger. I > > flashed 4.1.13-ti-r38 last night, did the usual "apt-get update", > installed > > the Atheros firmware, configured the WiFi, and now I'm out of space. I > can't > > even use "apt-get remove" at this point. I'd like to keep the MMC as a > > removable device so I can grab the data once in a while, so putting the > boot > > image is less desirable. > > > > Is there anyway to re-partition the eMMC card so I can have some > breathing > > room to remove some of the unneeded packages? > > > sudo apt-get clean > > Otherwise, the A5C has only 2GB on the eMMC.. > > If your only doing a temperature logger, just grab the smaller > "console" image: (around 300MB-ish installed) > > > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_Image_Testing_Snapshots > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.