I am trying to define a few GPIO in the device tree. Somehow it seems not to work. I added the following to the &am33xx_pinmux node:
status_pins: status_pins { pinctrl-single,pins = < 0x044 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* Run LED/gpio1_17/sys 49 */ 0x180 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* Error LED/gpio0_14/sys 14 */ 0x184 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* LAN LED/gpio0_15/sys 15 */ >; }; Created a custom node as follows: status { compatible = "bone-pinmux-helper"; pinctrl-names = "default"; pinctrl-0 = <&status_pins>; status = "okay"; }; After exporting gpio49 and checking the direction it is defined as input, while I expect output. Also tried to add &status_pins to the pinctrl of uart2 but it seems to have no effect. What am I overlooking here ? Thanks for any help -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.