The patch fix that you pointed to, was made on '*Thu, 10 Dec 2015*'. O/p in my serial console says 'U-Boot 2016.01 (Feb 15 2016.... So, I believe that the patch must have been already applied. Please correct me if I'm wrong.
Phani On Thursday, April 14, 2016 at 6:18:30 PM UTC-4, RobertCNelson wrote: > > > > On Thu, Apr 14, 2016 at 5:14 PM, Phani Gadupudi <phani.g...@gmail.com > <javascript:>> wrote: > >> Hello, >> >> I am trying to Beaglebone to work with Yoctoproject. I followed the >> instructions from >> https://www.yoctoproject.org/downloads/bsps/jethro20/beaglebone and >> copied sato-image to SD card. But the image won't boot. >> >> >> *A Note on how I partitioned my SD:* >> >> sudo fdisk -lu /dev/sdb >> >> Disk /dev/sdb: 15.5 GB, 15523119104 bytes >> 64 heads, 32 sectors/track, 14804 cylinders, total 30318592 sectors >> Units = sectors of 1 * 512 = 512 bytes >> Sector size (logical/physical): 512 bytes / 512 bytes >> I/O size (minimum/optimal): 512 bytes / 512 bytes >> Disk identifier: 0x000d842d >> >> Device Boot Start End Blocks Id System >> /dev/sdb1 * 2048 67583 32768 c W95 FAT32 (LBA) >> /dev/sdb2 67584 30318591 15125504 83 Linux >> >> >> I'm using PL2303 USB-TTL cable to debug. >> >> *O/P on the serial console* : >> >> U-Boot SPL 2016.01 (Feb 15 2016 - 19:53:09) >> Trying to boot from MMC >> reading args >> spl_load_image_fat_os: error reading image args, err - -1 >> reading u-boot.img >> reading u-boot.img >> >> U-Boot 2016.01 (Feb 15 2016 - 19:53:09 -0500) >> Watchdog enabled >> I2C: ready >> DRAM: 512 MiB >> NAND: 0 MiB >> >> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >> >> *** Error - No Valid Environment Area found >> >> *** Warning - bad CRC, using default environment >> >> >> >> Net: <ethaddr> not set. Validating first E-fuse MAC >> >> cpsw, usb_ether >> >> => >> > > u-boot 2016.01 is broken, this was fixed in git shortly after release.. > > > http://git.denx.de/?p=u-boot.git;a=commit;h=7205442e621db54ea06c3bca2d793e1ae2214f9c > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
