Hello, I have implemented a custom board base on beaglebone black schematic but i did not use HDMI part. I face a problem with kernel boot. i see these line and finally kernel panic happend. How can I solve this problem, is this problem comes because i dont use HDMI chip? Any help and comment will be appreciated.
Regards.
Uncompressing Linux... done, booting the
kernel.
[ 0.000000] Booting Linux on physical CPU
0x0
[ 0.000000] Initializing cgroup subsys
cpu
[ 0.000000] Linux version 3.8.13-00770-g25ad6c6c
(masoud@masoud-System-Product-Name) (gcc version 4.7.3 (Ubuntu/Linaro
4.7.3-12ubu5
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI
AM335x BeagleBone
[ 0.000000] bootconsole [earlycon0]
enabled
[ 0.000000] Memory policy: ECC disabled, Data cache
writeback
[ 0.000000] AM335X ES1.0 (neon
)
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b66000 s9408 r8192 d15168
u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129792
[ 0.000000] Kernel command line: console=ttyO0 earlyprintk
root=/dev/mmcblk0p2 rw
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] __ex_table already sorted, skipping
sort
[ 0.000000] allocated 1048576 bytes of
page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Memory: 511MB = 511MB
total
[ 0.000000] Memory: 510108k/510108k available, 14180k reserved, 0K
highmem
[ 0.000000] Virtual kernel memory
layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4
kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896
kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488
MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512
MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2
MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6
MB)
[ 0.000000] .text : 0xc0008000 - 0xc064c01c (6417
kB)
[ 0.000000] .init : 0xc064d000 - 0xc06834c0 ( 218
kB)
[ 0.000000] .data : 0xc0684000 - 0xc06fa9a0 ( 475
kB)
[ 0.000000] .bss : 0xc06fa9a0 - 0xc0755098 ( 362
kB)
[ 0.000000] Hierarchical RCU
implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to
nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16
16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
interrupts
[ 0.000000] Total of 128 interrupts on 1 active
controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000
Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000
Hz
[ 0.000000] Console: colour dummy device
80x30
[ 0.010235] Calibrating delay loop... 993.47 BogoMIPS
(lpj=969728)
[ 0.030154] pid_max: default: 32768 minimum:
301
[ 0.035131] Security Framework
initialized
[ 0.039494] Mount-cache hash table entries:
512
[ 0.050451] Initializing cgroup subsys
cpuacct
[ 0.055153] Initializing cgroup subsys
memory
[ 0.059769] Initializing cgroup subsys
blkio
[ 0.064343] CPU: Testing write buffer coherency:
ok
[ 0.069835] CPU0: thread -1, cpu 0, socket -1, mpidr
0
[ 0.075289] Setting up static identity map for 0x8038efd8 -
0x8038f024
[ 0.082917] Brought up 1
CPUs
[ 0.086091] SMP: Total of 1 processors activated (993.47
BogoMIPS).
[ 0.093375] devtmpfs:
initialized
[ 0.105619] omap_hwmod: wd_timer2: _wait_target_disable
failed
[ 0.164162] pinctrl core: initialized pinctrl
subsystem
[ 0.169761] rstctl core: initialized rstctl
subsystem
[ 0.175363] regulator-dummy: no
parameters
[ 0.180014] NET: Registered protocol family
16
[ 0.185178] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.198043] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size
568
[ 0.205876] platform 49000000.edma: alias fck already
exists
[ 0.211822] platform 49000000.edma: alias fck already
exists
[ 0.217751] platform 49000000.edma: alias fck already
exists
[ 0.224451] OMAP GPIO hardware version
0.1
[ 0.231411] gpio-rctrl rstctl.4: loaded
OK
[ 0.239088] hw-breakpoint: debug architecture 0x4
unsupported.
[ 0.246480] cpsw.0: No hwaddr in dt. Using 80:30:dc:60:2c:d5 from
efuse
[ 0.253403] cpsw.1: No hwaddr in dt. Using 80:30:dc:60:2c:d7 from
efuse
[ 0.269259] bio: create slab <bio-0> at
0
[ 0.280363] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine
driver
[ 0.287659] vmmcsd_fixed: 3300
mV
[ 0.292941] SCSI subsystem
initialized
[ 0.297186] usbcore: registered new interface driver
usbfs
[ 0.302994] usbcore: registered new interface driver
hub
[ 0.308760] usbcore: registered new device driver
usb
[ 0.315351] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400
kHz
[ 0.322145] input: tps65217_pwr_but as
/devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.332260] DCDC1: at 1500
mV
[ 0.336433] vdd_mpu: 925 <--> 1325 mV at 1325
mV
[ 0.342222] vdd_core: 925 <--> 1150 mV at 1125
mV
[ 0.348069] LDO1: at 1800
mV
[ 0.352044] LDO2: at 3300
mV
[ 0.356719] LDO3: 1800
mV
[ 0.360435] LDO4: at 3300
mV
[ 0.364325] tps65217 0-0024: TPS65217 ID 0xe version
1.2
[ 0.370341] omap_i2c 44e0b000.i2c: unable to select pin
group
[ 0.376865] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100
kHz
[ 0.384142] omap_i2c 4819c000.i2c: unable to select pin
group
[ 0.390332] media: Linux media interface:
v0.10
[ 0.395170] Linux video capture interface:
v2.00
[ 0.400177] pps_core: LinuxPPS API ver. 1
registered
[ 0.405397] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 0.415330] Advanced Linux Sound Architecture Driver
Initialized.
[ 0.422515] Switching to clocksource
gp_timer
[ 0.437337] NET: Registered protocol family
2
[ 0.442566] TCP established hash table entries: 4096 (order: 3, 32768
bytes)
[ 0.450018] TCP bind hash table entries: 4096 (order: 4, 81920
bytes)
[ 0.456831] TCP: Hash tables configured (established 4096 bind
4096)
[ 0.463525] TCP: reno
registered
[ 0.466955] UDP hash table entries: 256 (order: 1, 12288
bytes)
[ 0.473166] UDP-Lite hash table entries: 256 (order: 1, 12288
bytes)
[ 0.480066] NET: Registered protocol family
1
[ 0.485024] RPC: Registered named UNIX socket transport
module.
[ 0.491237] RPC: Registered udp transport
module.
[ 0.496186] RPC: Registered tcp transport
module.
[ 0.501124] RPC: Registered tcp NFSv4.1 backchannel transport
module.
[ 0.508324] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5
counters available
[ 0.517116] CPU PMU: attempt to register multiple PMU
devices!
[ 0.522981] arm-pmu: probe of arm-pmu failed with error
-28
[ 0.529324] omap2_mbox_probe: platform not
supported
[ 0.536992] VFS: Disk quotas
dquot_6.5.2
[ 0.541317] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.548898] NFS: Registering the id_resolver key
type
[ 0.554318] Key type id_resolver
registered
[ 0.558735] Key type id_legacy
registered
[ 0.562994] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat,
Inc.
[ 0.570613] msgmni has been set to
996
[ 0.576257] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 0.584003] io scheduler noop
registered
[ 0.588141] io scheduler deadline
registered
[ 0.592705] io scheduler cfq registered
(default)
[ 0.598668] tps65217-bl tps65217-bl: no platform data
provided
[ 0.604865] tps65217-bl: probe of tps65217-bl failed with error
-22
[ 0.612004] Serial: 8250/16550 driver, 4 ports, IRQ sharing
enabled
[ 0.619966] omap_uart 44e09000.serial: did not get pins for uart0 error:
-19
[ 0.627560] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a
OMAP UART0
[ 0.635360] console [ttyO0] enabled, bootconsole
disabled
[ 0.635360] console [ttyO0] enabled, bootconsole
disabled
[ 0.647369] [drm] Initialized drm 1.1.0
20060810
[ 0.660002] brd: module
loaded
[ 0.667191] loop: module
loaded
[ 0.670587] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 0.677810] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 0.685040] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 0.692258] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 0.699478] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 0.713435] bone-capemgr bone_capemgr.9: Baseboard:
'A335BNLT,00C0,4414BBBK1419'
[ 0.721188] bone-capemgr bone_capemgr.9:
compatible-baseboard=ti,beaglebone-black
[ 0.759211] bone-capemgr bone_capemgr.9: slot #0: No cape
found
[ 0.796318] bone-capemgr bone_capemgr.9: slot #1: No cape
found
[ 0.833427] bone-capemgr bone_capemgr.9: slot #2: No cape
found
[ 0.870535] bone-capemgr bone_capemgr.9: slot #3: No cape
found
[ 0.876763] bone-capemgr bone_capemgr.9: slot #4: specific
override
[ 0.883338] bone-capemgr bone_capemgr.9: bone: Using override eeprom
data at slot 4
[ 0.891343] bone-capemgr bone_capemgr.9: slot #4:
'Bone-LT-eMMC-2G,00A0,Texas
Instrument,BB-BONE-EMMC-2G'
[ 0.901421] bone-capemgr bone_capemgr.9: slot #5: specific
override
[ 0.908001] bone-capemgr bone_capemgr.9: bone: Using override eeprom
data at slot 5
[ 0.916014] bone-capemgr bone_capemgr.9: slot #5:
'Bone-Black-HDMI,00A0,Texas
Instrument,BB-BONELT-HDMI'
[ 0.925995] bone-capemgr bone_capemgr.9: slot #6: specific
override
[ 0.932559] bone-capemgr bone_capemgr.9: bone: Using override eeprom
data at slot 6
[ 0.940573] bone-capemgr bone_capemgr.9: slot #6:
'Bone-Black-HDMIN,00A0,Texas
Instrument,BB-BONELT-HDMIN'
[ 0.951059] bone-capemgr bone_capemgr.9: initialized
OK.
[ 0.956661] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware
'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', '
[ 0.970217] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware
'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-H'
[ 0.985825] OneNAND driver
initializing
[ 0.990729] usbcore: registered new interface driver
asix
[ 0.996412] bone-capemgr bone_capemgr.9: slot #4: dtbo
'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
[ 1.007084] bone-capemgr bone_capemgr.9: slot #5: dtbo
'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
[ 1.018353] usbcore: registered new interface driver
cdc_ether
[ 1.024527] usbcore: registered new interface driver
smsc95xx
[ 1.030753] bone-capemgr bone_capemgr.9: slot #4: #2
overlays
[ 1.037331] bone-capemgr bone_capemgr.9: slot #5: #4
overlays
[ 1.043412] usbcore: registered new interface driver
net1080
[ 1.049920] bone-capemgr bone_capemgr.9: slot #4: Applied #2
overlays.
[ 1.058171] platform 4830e000.fb: alias fck already
exists
[ 1.064019] usbcore: registered new interface driver
cdc_subset
[ 1.071271] bone-capemgr bone_capemgr.9: slot #5: Applied #4
overlays.
[ 1.078216] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware
'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-'
[ 1.092581] usbcore: registered new interface driver
zaurus
[ 1.098607] usbcore: registered new interface driver
cdc_ncm
[ 1.104591] bone-capemgr bone_capemgr.9: slot #6: dtbo
'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
[ 1.116462] usbcore: registered new interface driver
cdc_acm
[ 1.122435] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 1.130810] Initializing USB Mass Storage
driver...
[ 1.136181] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN
conflict P8.45 (#5:BB-BONELT-HDMI)
[ 1.145738] bone-capemgr bone_capemgr.9: slot #6: Failed
verification
[ 1.152485] bone-capemgr bone_capemgr.9: loader: retrying slot-6
BB-BONELT-HDMIN:00A0 (prio 2)
[ 1.161600] usbcore: registered new interface driver
usb-storage
[ 1.167892] USB Mass Storage support
registered.
[ 1.172852] musb-hdrc: version 6.0, ?dma?, otg
(peripheral+host)
[ 1.179390] musb-hdrc musb-hdrc.0.auto: pdev->id =
0
[ 1.184608] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468
dsps_musb_init: OK
[ 1.193357] bone-capemgr bone_capemgr.9: loader: failed to load slot-6
BB-BONELT-HDMIN:00A0 (prio 2)
[ 1.203168] musb-hdrc musb-hdrc.0.auto: ***
mode=3
[ 1.208203] musb-hdrc musb-hdrc.0.auto: ***
power=250
[ 1.213979] musb-hdrc musb-hdrc.1.auto: pdev->id =
1
[ 1.219211] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468
dsps_musb_init: OK
[ 1.228102] musb-hdrc musb-hdrc.1.auto: ***
mode=1
[ 1.233145] musb-hdrc musb-hdrc.1.auto: ***
power=250
[ 1.238450] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host
driver
[ 1.244720] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned
bus number 1
[ 1.253078] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 1.260193] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.267746] usb usb1: Product: MUSB HDRC host
driver
[ 1.272942] usb usb1: Manufacturer: Linux 3.8.13-00770-g25ad6c6c
musb-hcd
[ 1.280037] usb usb1: SerialNumber:
musb-hdrc.1.auto
[ 1.285849] hub 1-0:1.0: USB hub
found
[ 1.289830] hub 1-0:1.0: 1 port
detected
[ 1.294782] mousedev: PS/2 mouse device common for all
mice
[ 1.302239] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as
rtc0
[ 1.309667] 44e3e000.rtc: already
running
[ 1.314048] i2c /dev entries
driver
[ 1.318765] pps_ldisc: PPS line discipline
registered
[ 1.324161] Driver for 1-wire Dallas network
protocol.
[ 1.330737] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60
sec
[ 1.338147] cpuidle: using governor
ladder
[ 1.342444] cpuidle: using governor
menu
[ 1.346877] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset'
failed
[ 1.354076] omap_hsmmc mmc.5: Failed to get rstctl; not using
any
[ 1.360732] edma-dma-engine edma-dma-engine.0: allocated channel for
0:25
[ 1.367884] edma-dma-engine edma-dma-engine.0: allocated channel for
0:24
[ 1.375143] mmc.5 supply vmmc_aux not found, using dummy
regulator
[ 1.381934] omap_hsmmc mmc.5: pins are not configured from the
driver
[ 1.415688] gpio-rctrl rstctl.4: gpio_rctrl_request
eMMC_RSTn
[ 1.421828] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn)
label:eMMC_RSTn
[ 1.429782] gpio-rctrl rstctl.4: gpio_rctrl_deassert
eMMC_RSTn
[ 1.436109] edma-dma-engine edma-dma-engine.0: allocated channel for
0:3
[ 1.443189] edma-dma-engine edma-dma-engine.0: allocated channel for
0:2
[ 1.450553] mmc.11 supply vmmc_aux not found, using dummy
regulator
[ 1.457211] omap_hsmmc mmc.11: pins are not configured from the
driver
[ 1.491948] pinctrl-single 44e10800.pinmux: pin 44e10854 already
requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[ 1.503593] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status
-22
[ 1.510870] pinctrl-single 44e10800.pinmux: could not request pin 21 on
device pinctrl-single
[ 1.519800] leds-gpio gpio-leds.8: pins are not configured from the
driver
[ 1.527795] ledtrig-cpu: registered to indicate activity on
CPUs
[ 1.534358] edma-dma-engine edma-dma-engine.0: allocated channel for
0:36
[ 1.541506] omap-sham 53100000.sham: hw accel on OMAP rev
4.3
[ 1.548992] omap-aes 53500000.aes: OMAP AES hw accel rev:
3.2
[ 1.555191] edma-dma-engine edma-dma-engine.0: allocated channel for
0:5
[ 1.562324] edma-dma-engine edma-dma-engine.0: allocated channel for
0:6
[ 1.572634] usbcore: registered new interface driver
usbhid
[ 1.578537] usbhid: USB HID core
driver
[ 1.584670] mmc0: host does not support reading read-only switch.
assuming write-enable.
[ 1.593810] davinci_evm sound.14: nxp-hdmi-hifi <-> 48038000.mcasp
mapping ok
[ 1.603683] mmc0: new high speed SD card at address
998f
[ 1.609455] ip_tables: (C) 2000-2006 Netfilter Core
Team
[ 1.615526] mmcblk0: mmc0:998f SD02G 1.83
GiB
[ 1.620449] arp_tables: (C) 2002 David S.
Miller
[ 1.626015] TCP: cubic
registered
[ 1.629532] Initializing XFRM netlink
socket
[ 1.634100] mmcblk0: p1
p2
[ 1.637194] NET: Registered protocol family
17
[ 1.642601] NET: Registered protocol family
15
[ 1.647453] Key type dns_resolver
registered
[ 1.652107] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 3
[ 1.660188] ThumbEE CPU extension
supported.
[ 1.664696] Registering SWP/SWPB emulation
handler
[ 1.670282] registered taskstats version
1
[ 1.675541] pinctrl-single 44e10800.pinmux: pin 44e109b0 already
requested by mmc.11; cannot claim for hdmi.13
[ 1.686026] pinctrl-single 44e10800.pinmux: pin-108 (hdmi.13) status
-22
[ 1.693037] pinctrl-single 44e10800.pinmux: could not request pin 108 on
device pinctrl-single
[ 1.702037] slave hdmi.13: Failed to select default
state
[ 1.707753] slave: probe of hdmi.13 failed with error
-22
[ 1.714545] tilcdc 4830e000.fb: No power control
GPIO
[ 1.720818] dummy 0-0034: Error -121 writing to
cec:0xff
[ 1.726526] tda998x 0-0070: Error -121 reading from
0xa
[ 1.732133] tda998x 0-0070: Error -121 writing to
0xa
[ 1.778455] mmc1: BKOPS_EN bit is not
set
[ 1.785764] mmc1: new high speed MMC card at address
0001
[ 1.791494] tda998x 0-0070: Error -121 reading from
0xa
[ 1.797462] mmcblk1: mmc1:0001 MMC04G 3.65
GiB
[ 1.802305] tda998x 0-0070: Error -121 writing to
0xa
[ 1.807798] mmcblk1boot0: mmc1:0001 MMC04G partition 1 1.00
MiB
[ 1.814206] mmcblk1boot1: mmc1:0001 MMC04G partition 2 1.00
MiB
[ 1.822184] mmcblk1: unknown partition
table
[ 1.828336] mmcblk1boot1: unknown partition
table
[ 1.834826] mmcblk1boot0: unknown partition
table
[ 1.858894] tda998x 0-0070: Error -121 reading from
0x1
[ 1.864445] tda998x 0-0070: Error -121 writing to
0x1
[ 1.869798] tda998x 0-0070: Error -121 reading from
0x1
[ 1.875341] tda998x 0-0070: Error -121 writing to
0x1
[ 1.880700] tda998x 0-0070: Error -121 writing to
REG_CURPAGE
[ 1.886776] tda998x 0-0070: Error -121 writing to
0x200
[ 1.892311] tda998x 0-0070: Error -121 writing to
0x201
[ 1.897845] tda998x 0-0070: Error -121 writing to
0x202
[ 1.903371] tda998x 0-0070: Error -121 writing to
0x203
[ 1.908907] tda998x 0-0070: Error -121 writing to
0x204
[ 1.914436] tda998x 0-0070: Error -121 writing to
0x205
[ 1.919974] tda998x 0-0070: Error -121 writing to
0x20e
[ 1.925513] tda998x 0-0070: Error -121 writing to
0x211
[ 1.931045] tda998x 0-0070: Error -121 writing to
0x207
[ 1.936572] tda998x 0-0070: Error -121 writing to
0x208
[ 1.942172] tda998x 0-0070: Error -121 writing to
0x209
[ 1.947708] tda998x 0-0070: Error -121 writing to
0x20a
[ 1.953243] tda998x 0-0070: Error -121 writing to
0x206
[ 1.958771] tda998x 0-0070: Error -121 writing to
REG_CURPAGE
[ 1.964852] tda998x 0-0070: Error -121 reading from
0x0
[ 1.970392] tda998x 0-0070: Error -121 reading from
0x2
[ 1.976094] tilcdc 4830e000.fb: no encoders/connectors
found
[ 1.982017] tilcdc 4830e000.fb: failed to initialize mode
setting
[ 2.038521] davinci_mdio 4a101000.mdio: davinci mdio revision
1.6
[ 2.044913] davinci_mdio 4a101000.mdio: no live phy, scanning
all
[ 2.051554] davinci_mdio: probe of 4a101000.mdio failed with error
-5
[ 2.058523] Detected MACID =
80:30:dc:60:2c:d5
[ 2.063049] Unhandled fault: external abort on non-linefetch (0x1008) at
0xe09fe000
[ 2.071212] Internal error: : 1008 [#1] SMP
THUMB2
[ 2.076204] Modules linked
in:
[ 2.079389] CPU: 0 Not tainted (3.8.13-00770-g25ad6c6c
#2)
[ 2.085476] PC is at
cpsw_probe+0x402/0x8a4
[ 2.089842] LR is at
ioremap_page_range+0xc3/0x100
[ 2.094842] pc : [<c024258e>] lr : [<c01935d7>] psr:
80000133
[ 2.094842] sp : df06fe18 ip : df04f7f8 fp :
00000001
[ 2.106807] r10: df374b20 r9 : df370d90 r8 :
00000000
[ 2.112257] r7 : e09fe000 r6 : df112600 r5 : df112610 r4 :
df370800
[ 2.119073] r3 : 00000000 r2 : 00000800 r1 : c0242579 r0 :
e09fe000
[ 2.125881] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA Thumb
Segment kernel
[ 2.133679] Control: 50c5387d Table: 80004019 DAC:
00000015
[ 2.139663] Process swapper/0 (pid: 1, stack limit =
0xdf06e240)
[ 2.145926] Stack: (0xdf06fe18 to
0xdf070000)
[ 2.150463] fe00:
00000000 00000000
[ 2.158990] fe20: df00d540 07d707d6 df370a98 c038d98b df04eac0 00000000
df06fe4c 00000020
[ 2.167518] fe40: 00000008 c00ce151 df06fe90 df3f6ac8 df06fe78 df04eac0
df3f6c08 df3f6ac8
[ 2.176044] fe60: df3f6ac8 c00ce093 00000000 df3f6ac8 df10f148 df3720c0
00000000 c00ce86f
[ 2.184574] fe80: df0494b8 c00402cb 00000000 00000003 df10f148 00000000
c06df6c8 df112610
[ 2.193108] fea0: df112644 c06df6c8 c01f3d81 000000fc c0665035 00000000
00000000 c01f46ed
[ 2.201641] fec0: c01f46e1 c01f3ca3 00000000 df112610 df112644 c06df6c8
c01f3d81 c01f3db5
[ 2.210172] fee0: 00000000 df06fef0 c06df6c8 c01f2dd5 df049478 df10eb80
c06df6c8 c06df6c8
[ 2.218693] ff00: df3720c0 c06d5b00 00000000 c01f3767 c056bbe7 df001348
c06df6c8 c066e5f8
[ 2.227227] ff20: c0680740 c06fa9c0 000000fc c01f4095 00000007 c066e5f8
c0680740 c06fa9c0
[ 2.235764] ff40: 000000fc c000868d c0665035 c0756000 c068076c 00000008
00000007 c066e5f8
[ 2.244285] ff60: c0680740 c06fa9c0 000000fc c066e600 c064d1d1 c064d68d
00000007 00000007
[ 2.252805] ff80: c064d1d1 00000000 00000000 c0387201 00000000 00000000
00000000 00000000
[ 2.261328] ffa0: 00000000 c0387207 00000000 c000c6b9 00000000 00000000
00000000 00000000
[ 2.269859] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000
[ 2.278393] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
00000000 00000000
[ 2.286949] [<c024258e>] (cpsw_probe+0x402/0x8a4) from [<c01f46ed>]
(platform_drv_probe+0xd/0xe)
[ 2.296124] [<c01f46ed>] (platform_drv_probe+0xd/0xe) from [<c01f3ca3>]
(driver_probe_device+0x67/0x144)
[ 2.306014] [<c01f3ca3>] (driver_probe_device+0x67/0x144) from
[<c01f3db5>] (__driver_attach+0x35/0x48)
[ 2.315812] [<c01f3db5>] (__driver_attach+0x35/0x48) from [<c01f2dd5>]
(bus_for_each_dev+0x29/0x48)
[ 2.325264] [<c01f2dd5>] (bus_for_each_dev+0x29/0x48) from [<c01f3767>]
(bus_add_driver+0x83/0x158)
[ 2.334708] [<c01f3767>] (bus_add_driver+0x83/0x158) from [<c01f4095>]
(driver_register+0x4d/0xa4)
[ 2.344061] [<c01f4095>] (driver_register+0x4d/0xa4) from [<c000868d>]
(do_one_initcall+0x61/0xec)
[ 2.353412] [<c000868d>] (do_one_initcall+0x61/0xec) from [<c064d68d>]
(kernel_init_freeable+0xb9/0x14c)
[ 2.363309] [<c064d68d>] (kernel_init_freeable+0xb9/0x14c) from
[<c0387207>] (kernel_init+0x7/0x90)
[ 2.372748] [<c0387207>] (kernel_init+0x7/0x90) from [<c000c6b9>]
(ret_from_fork+0x11/0x38)
[ 2.381452] Code: fd6a e1fe f8c4 05c0 (6803)
f44f
[ 2.386444] ---[ end trace c94d113240daf660
]---
[ 2.391592] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[
2.391592]
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
