For instance: william@beaglebone:~$ ls /sys/class/net eth0 lo william@beaglebone:~$ sudo modprobe g_ether
william@beaglebone:~$ ls /sys/class/net eth0 lo usb0 william@beaglebone:~$ sudo ifconfig . . . usb0 Link encap:Ethernet HWaddr 7e:68:32:bc:58:89 inet addr:192.168.7.2 Bcast:192.168.7.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:1 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76 (76.0 B) TX bytes:0 (0.0 B) However, I've no idea how your device is meant to be used once it's connected a an USBNET device. And now you've just posted, and you've got a problem. You're connected to your beaglebone via USB too which may cause problems. You're only allowed to use one instance of a gadget driver, total. So you can not use USB serial, or USB networkign to the beaglebone in order for your device to work. You're going power via barrel jack, connect to the beaglebone over the ethernet port. *OR* if you want to still power via USB, you're going to have to figure out how to disable the USB gadget drivers for the beaglebone, while still having it available for your external device. I did notice you had TTYACM0 enabled so that'll definitely have to go away. On Wed, Apr 20, 2016 at 4:27 PM, William Hermans <yyrk...@gmail.com> wrote: > What output do you get from: > > $ ls /sys/class/net > > ? > > > On Wed, Apr 20, 2016 at 4:22 PM, Matt99eo <mattmaherpeter...@gmail.com> > wrote: > >> PPP currently not supported the modem MFR. Hopefully a firmware update >> coming soon. In the meantime they have pointed me at cdc_ether. >> >> >> >> On Wednesday, April 20, 2016 at 4:19:27 PM UTC-7, RobertCNelson wrote: >>> >>> >>> >>> On Wed, Apr 20, 2016 at 6:15 PM, Matt99eo <mattmahe...@gmail.com> wrote: >>> >>>> So how do I get the BBB to take the reins and do configure this bad >>>> boy!? >>>> >>> >>> pppd >>> >>> https://wiki.archlinux.org/index.php/3G_and_GPRS_modems_with_pppd >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> https://rcn-ee.com/ >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/a8f290c9-e1ec-4bfb-b0a8-0472a72b9590%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/a8f290c9-e1ec-4bfb-b0a8-0472a72b9590%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORqXohUpev%3DLEX39g-%2BsbrCNUnvxuQpXQ8bvfmJGWEE-nQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.