On Wed, May 11, 2016 at 10:50 AM, Sergey Manucharian <arag...@gmail.com> wrote:
> That was the first think I tried, but it's simply ignored: > > bone_capemgr.enable_partno=XXXX > > > Well, that is the kernel parameter, so how did you pass it to the kernel from u-boot? in /boot/uEnv.txt i have a some macro's setup: cape_enable=bone_capemgr.enable_partno=XXXX (our default u-boot has been patched to recognize cape_enable=) or add it to the cmdline variable: cmdline=bone_capemgr.enable_partno=XXXX Then you should see it via: cat /proc/cmdline Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYj14sxQ4swy44hwZjXVA2%2BUhM5xUYVFXvzNPwpsBQT9uA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.