I have been trying to run a python GUI program on the beaglebone black through SSH. It is connected to the BBVIEW <https://www.element14.com/community/docs/DOC-55844/l/expansion-board-for-beaglebone-family-with-7-inch-lcd> and the GUI runs if I diirectly open the command window in beaglebone using a keyboard and mouse connected to the beaglebone. I have tried to add "python GUI.py" in uEnv.txt for startup but it still doesn't seem to startup on reboot. When i try to run it on ssh with BBVIEW connected but not connected to the keyboard or mouse it gives an xDISPLAY error. I am new to this forum so any feedback on the the post is welcome :)
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/baed96e9-638d-41e2-8569-bd6aa63595b4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.