So, on this crash....Does it basically reset or just stop? How do you recover?
Gerald On Thu, Jun 30, 2016 at 3:14 PM, Wally Bkg <wb666gre...@gmail.com> wrote: > "Well, I don't know where to start. A detailed diagram of the entire > system hookup would help. > > Gerald" > > Being in active use for ~25 years and hooked to a variety of computers as > the years have passed, its never been a problem, but the best I could do > would be a scan of the diagrams I've built it from. Its very repetitive, > four basic interface circuit designs repeated 2, 4, 8, 16 times. But I may > get desperate enough to do this, eventually. > > But it acted as if the power button had been held down and just shut off, > and there was minimal disturbance to lights (mix of incandescent, CF, and > LED) and the various USPes around the house, so I'm thinking maybe EMP > sensitivity in the power controller chip. Its an old house (built circa > 1950), but this outlet is one that I ran a 12ga stranded wire straight from > the outlet to the grounding rod at the service entrance when we first moved > in to give me a good ground back in the days I did a lot of hardware work > -- remember the days of wire-wrapped S-100 bus prototypes :) > > OTOH, as I've upgraded the security cameras to HD I've reused the SD > camera wiring to add additional PIR motion detectors, and I just discovered > (after posting this thread) I'd one added PIR unintentionally powered from > a different UPS (but they are all on the same breaker and safety ground > connection), so I'll see if it happens again. This had been the case for > the first thunderstorm crash a few months ago as well. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/6cc15654-ade8-4aea-821b-c7bed75f5575%40googlegroups.com > . > For more options, visit https://groups.google.com/d/optout. > -- Gerald ger...@beagleboard.org http://beagleboard.org/ gcol...@emprodesign.com -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK_S%2Be95AW5w7o5gwcyvnULgy_3cvVqOVMOmj30g-P5tJF3Ag%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.