Hi all, Connected BeagleBone black (rev C) to PC through USB. Its detecting properly & All four LEDS on the board are flashing as expecting. I could Install drivers successfully(followed instructions from GETTING STARTED page of BeagleBone.org). But when i am trying to open http://192.168.7.2/ in browser its not opening.
In PCs "Start--> view network connections", i could find that it showing "Network Cable Unplugged" (screen shot attached for reference). Is it problem with the webserver in my linux distribution. <https://lh3.googleusercontent.com/-ePiTVrnyndo/V4TB10kaDNI/AAAAAAAAAmo/KeW4C838MeU8vBq_E4AYQtXwaQftiywsgCLcB/s1600/Beagle_issue.jpg> Can some one help me to sort out this problem. This is not a problem occuring in regular. Infact till last week it detected properly. I took a short break and now trying to open in a new PC. Its not detecting. Thank you. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/93ae3204-28d7-42ac-8b0b-2c3466fe684e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.