> > On Tue, Aug 2, 2016 at 12:43 PM, Lidia Toscano <lidia.tosc...@gmail.com> > wrote: > >> After editing the uEnv.txt file my BBB is still not flashing. The LEDs >>> come on and stay lit after only a couple of seconds as though it had been >>> flashed. Any other ideas? >>> >> >> Thanks. >> >> oops right. This could be an older boot loader issue. So, in order to boot from the sdcard, you may need to press, and hold down the boot button. Which is at the opposite end of the board from the ethernet port, and a little to the left, Only button on that side of the board . .
Anyway, heh. Press and hold the button until you see a blink pattern on the LEDs, then you can let go. Let us know if that solves your issue. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORqJKOqvaGYHWRwKrxytOc9AjDvKYem5975jP_BxjtfeGw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
