On Wed, Aug 10, 2016 at 7:17 AM, Phil Mills <phil.mi...@gmail.com> wrote:
I2C_SLAVE_FORCE got the job done - thank you very much for the suggestion, > William. My additional manufacturing and cal information is now fat and > happy on the EEPROM. > > Had to leave a much longer delay between writes than I'd expected, though. > Yeah, somewhere, probably in the /sys/bus/i2c, but maybe in the kernel driver I was noticing that i2c speeds seemed to be set lower than even 400kbit/s. The "magic number" that I'm thinking is 180kbit/s, but this is just something I was noticing while looking for something else. So might be wrong. Either way, 400kbit/s is not all that fast. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORr0mCurb%2BxKN_96wx0thxDa6RF57N1z04htcX3q_KdGGw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.