Okay, 4.4.22-ti-r49 has hit the repo: With, (the default)
dtb=am335x-bonegreen-wireless.dtb debian@beaglebone:~$ dmesg | grep wl [ 2.446968] wlan-en-regulator: disabling [ 35.950050] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 36.027459] wlcore: loaded [ 36.425547] wlcore: PHY firmware version: Rev 8.2.0.0.236 [ 36.465441] wlcore: firmware booted (Rev 8.9.0.0.69) [ 36.479113] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 37.165183] wlcore: ERROR ELP wakeup timeout! [ 37.169902] WARNING: CPU: 0 PID: 1093 at drivers/net/wireless/ti/wlcore/main.c:797 wl12xx_queue_recovery_work.part.8+0x46/0x48 [wlcore]() [ 37.169914] Modules linked in: arc4 wl18xx wlcore bnep mac80211 cfg80211 hci_uart btbcm btqca bluetooth rfkill 8021q garp mrp stp llc snd_soc_evm snd_soc_wilink8_bt omap_sham omap_aes_driver asix usbnet mii omap_rng rng_core snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap wlcore_sdio snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore evdev uio_pdrv_genirq uio usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite [ 37.170282] [<c00311ab>] (warn_slowpath_null) from [<bfb68dab>] (wl12xx_queue_recovery_work.part.8+0x46/0x48 [wlcore]) [ 37.170465] [<bfb68dab>] (wl12xx_queue_recovery_work.part.8 [wlcore]) from [<bfb6a97f>] (wl12xx_queue_recovery_work+0x12/0x14 [wlcore]) [ 37.170608] [<bfb6a97f>] (wl12xx_queue_recovery_work [wlcore]) from [<bfb71fd3>] (wl1271_ps_elp_wakeup+0x192/0x198 [wlcore]) [ 37.170750] [<bfb71fd3>] (wl1271_ps_elp_wakeup [wlcore]) from [<bfb6a0ad>] (wl1271_op_add_interface+0x78/0x774 [wlcore]) [ 37.171374] [<bfb6a0ad>] (wl1271_op_add_interface [wlcore]) from [<bfabb8c9>] (drv_add_interface+0x38/0x118 [mac80211]) [ 37.177169] wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.69 [ 37.177456] WARNING: CPU: 0 PID: 6 at drivers/net/wireless/ti/wlcore/io.h:65 wlcore_set_partition+0x6e/0x374 [wlcore]() [ 37.177465] Modules linked in: arc4 wl18xx wlcore bnep mac80211 cfg80211 hci_uart btbcm btqca bluetooth rfkill 8021q garp mrp stp llc snd_soc_evm snd_soc_wilink8_bt omap_sham omap_aes_driver asix usbnet mii omap_rng rng_core snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap wlcore_sdio snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore evdev uio_pdrv_genirq uio usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite [ 37.177713] Workqueue: phy0 wl1271_recovery_work [wlcore] [ 37.177924] [<c00311ab>] (warn_slowpath_null) from [<bfb6f02f>] (wlcore_set_partition+0x6e/0x374 [wlcore]) [ 37.178071] [<bfb6f02f>] (wlcore_set_partition [wlcore]) from [<bfb68539>] (wl1271_recovery_work+0x60/0x250 [wlcore]) [ 37.178162] [<bfb68539>] (wl1271_recovery_work [wlcore]) from [<c00441c5>] (process_one_work+0xf1/0x328) [ 37.178242] wlcore: down [ 41.032208] wlcore: ERROR timeout waiting for the hardware to complete initialization [ 44.369031] wlcore: ERROR timeout waiting for the hardware to complete initialization [ 46.452849] wlcore: ERROR timeout waiting for the hardware to complete initialization [ 46.462838] wlcore: ERROR firmware boot failed despite 3 retries [ 46.469625] Modules linked in: arc4 wl18xx wlcore bnep mac80211 cfg80211 hci_uart btbcm btqca bluetooth rfkill 8021q garp mrp stp llc snd_soc_evm snd_soc_wilink8_bt omap_sham omap_aes_driver asix usbnet mii omap_rng rng_core snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap wlcore_sdio snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore evdev uio_pdrv_genirq uio usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite [ 46.475593] wlan0: Failed check-sdata-in-driver check, flags: 0x0 [ 46.475600] Modules linked in: arc4 wl18xx wlcore bnep mac80211 cfg80211 hci_uart btbcm btqca bluetooth rfkill 8021q garp mrp stp llc snd_soc_evm snd_soc_wilink8_bt omap_sham omap_aes_driver asix usbnet mii omap_rng rng_core snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap wlcore_sdio snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore evdev uio_pdrv_genirq uio usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite and with: dtb=am335x-bonegreen-wireless-led-hack.dtb debian@beaglebone:~$ dmesg | grep wl [ 35.993746] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 36.063117] wlcore: loaded [ 36.461283] wlcore: PHY firmware version: Rev 8.2.0.0.236 [ 36.501070] wlcore: firmware booted (Rev 8.9.0.0.69) [ 36.515063] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.794484] wlcore: down [ 37.519933] wlcore: down [ 37.576262] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 37.578035] device wlan0 entered promiscuous mode [ 37.804938] tether: port 1(wlan0) entered forwarding state [ 37.805046] tether: port 1(wlan0) entered forwarding state Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgVGpkhn4Tfm4jQp0PK1fVgoYMZs_L6PG52OmTTecSyhw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
