So after decompiling the two files and comparing with diff, then piping to a file . . . the diff file is literally 2186 lines in length . . . wtf ?
On Thu, Oct 20, 2016 at 5:25 PM, William Hermans <yyrk...@gmail.com> wrote: > So, at this point I think I'll have to decompile both board files, and > then run diff to see what's different. > > On Wed, Oct 19, 2016 at 10:16 PM, William Hermans <yyrk...@gmail.com> > wrote: > >> Overlay, meaning board file. >> >> On Wed, Oct 19, 2016 at 10:15 PM, William Hermans <yyrk...@gmail.com> >> wrote: >> >>> Yeah I'm locked in a boot loop ending here: >>> >>> Starting kernel ... >>> >>> [ 3.341689] CPUidle arm: CPU 0 failed to init idle CPU ops >>> [ 3.347892] omap_hsmmc 48060000.mmc: unable to obtain RX DMA engine >>> channel 3706465728 >>> [ 3.356275] omap_hsmmc 481d8000.mmc: unable to obtain RX DMA engine >>> channel 3706465648 >>> [ 3.366324] wkup_m3_rproc 44d00000.wkup_m3: Platform data missing! >>> [ 3.374426] omap_voltage_late_init: Voltage driver support not added >>> [ 3.381301] cpu cpu0: cpu0 clock notifier not ready, retry >>> [ 3.482097] bone_capemgr bone_capemgr: Invalid signature 'ffffffff' >>> at slot 0 >>> [ 3.489295] bone_capemgr bone_capemgr: slot #0: No cape found >>> [ 3.548114] bone_capemgr bone_capemgr: slot #1: No cape found >>> [ 3.608112] bone_capemgr bone_capemgr: slot #2: No cape found >>> [ 3.668112] bone_capemgr bone_capemgr: slot #3: No cape found >>> [ 3.675302] cpsw 4a100000.ethernet: Missing rx_descs property in the >>> DT. >>> [ 3.682080] cpsw 4a100000.ethernet: cpsw: platform data missing >>> Loading, please wait... >>> >>> A few points of contention. Kernel is a the LTS 4.1.x*bone-rt* variant. >>> Updated yesterday. Then the board is a beaglebone green, but I rebuilt >>> am335x-boneblack-emmc-overlay.dtb. Which is the same overlay file I was >>> loading previous to rebuilding. >>> >>> On Wed, Oct 19, 2016 at 11:27 AM, William Hermans <yyrk...@gmail.com> >>> wrote: >>> >>>> Thanks again Robert, >>>> >>>> So I'll have to download the overlay board file repo, edit, and then >>>> install but hummm. Been a while I need: >>>> >>>> ##BeagleBone Black: HDMI (Audio/Video) disabled: >>>> dtb=am335x-boneblack-emmc-overlay.dtb >>>> >>>> Which probably loads the common overlay file, so . ..yeah ok think I >>>> got it. Going to be busy today with other things( unavoidable ) so might be >>>> tomorrow before I can write back success in modifying the board file. After >>>> which I can hopefully get this modification out to be tested on multiple >>>> boards by this person I know. >>>> >>>> I'll post full instructions for others here, when I get the chance. SO >>>> others can test, and potentially fix the same issue if needed. >>>> >>>> On Wed, Oct 19, 2016 at 11:15 AM, Robert Nelson < >>>> robertcnel...@gmail.com> wrote: >>>> >>>>> On Wed, Oct 19, 2016 at 1:09 PM, William Hermans <yyrk...@gmail.com> >>>>> wrote: >>>>> > Thanks Robert, >>>>> > >>>>> > I'll check that out, So when you sasy "remove the sleeps". I just >>>>> delete >>>>> > "sleep" from pinctrl-names = "default", "sleep"; or do I need to >>>>> also remove >>>>> > pinctrl-1 = <&cpsw_sleep>; as well ? >>>>> >>>>> >>>>> Yeah, from: >>>>> >>>>> &mac { >>>>> pinctrl-names = "default", "sleep"; >>>>> pinctrl-0 = <&cpsw_default>; >>>>> pinctrl-1 = <&cpsw_sleep>; >>>>> slaves = <1>; >>>>> status = "okay"; >>>>> }; >>>>> >>>>> &davinci_mdio { >>>>> pinctrl-names = "default", "sleep"; >>>>> pinctrl-0 = <&davinci_mdio_default>; >>>>> pinctrl-1 = <&davinci_mdio_sleep>; >>>>> status = "okay"; >>>>> }; >>>>> >>>>> to: >>>>> >>>>> &mac { >>>>> pinctrl-names = "default"; >>>>> pinctrl-0 = <&cpsw_default>; >>>>> slaves = <1>; >>>>> status = "okay"; >>>>> }; >>>>> >>>>> &davinci_mdio { >>>>> pinctrl-names = "default"; >>>>> pinctrl-0 = <&davinci_mdio_default>; >>>>> status = "okay"; >>>>> }; >>>>> >>>>> Regards, >>>>> >>>>> >>>>> -- >>>>> Robert Nelson >>>>> https://rcn-ee.com/ >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to beagleboard+unsubscr...@googlegroups.com. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/beagleboard/CAOCHtYi7pEF_R >>>>> uKLAvCh2ZiXuhnK-oggZykntXCND6FC8rQiyw%40mail.gmail.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> >>> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORq4z2QWFyLB7Qp3aEuRu-u_6zVDdC6XSQGXioQVVwiSKw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.