Thats a case where you make the call.

On Fri, Dec 16, 2016 at 5:12 PM, Gregg Harrington <gr...@greggharrington.com
> wrote:

> Is this a case I should RMA it? Or should I just solder it down?
>
> Thanks,
>
> Gregg
>
>
> On Friday, December 16, 2016 at 2:43:52 PM UTC-8, RobertCNelson wrote:
>>
>> On Fri, Dec 16, 2016 at 4:39 PM, Gregg Harrington
>> <gr...@greggharrington.com> wrote:
>> > I just tried to power my BBBWL through the barrel connector and wasn't
>> able
>> > to get it to power, when I looked at the bottom of the board, the
>> connector
>> > isn't soldered to the pad. When I short the pad to the pin, it boots up
>> and
>> > starts drawing power. Is this expected, did I get a weird board.
>>
>> Ah! Now it makes sense why the eeprom never got programmed!!!
>>
>> I bet your board was in the wrong pile at the factory...
>>
>> Regards,
>>
>> --
>> Robert Nelson
>> https://rcn-ee.com/
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/beagleboard/6ba5eb4e-acfa-482a-88a8-68fecc5c63b4%40googlegroups.com
> <https://groups.google.com/d/msgid/beagleboard/6ba5eb4e-acfa-482a-88a8-68fecc5c63b4%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CALHSORpyi2sqCjgCe7fFUz5-ERvsQUww34t6HyUNGVrRAp32wg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to