Hello, I have a BBB which is currently powered via USB and external power supply (and a similar BBG which is powered via USB and via external supply feed into VDD from connected cape).
Now when a user wants to do a full power cycle, all possible power sources have to be disconnected which can be somewhat complicated. So my question: is there a possibility to disable power supply via USB? E.g. a soldering jumper which has to be opened? Or in case not - is there a possibility to permanently program the PMIC to not to power the board from USB? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/97e52b5b-077f-4f91-8da3-a343891b3833%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.