The steps taken were as follows (same as on http://www.rescuerobot.org/drupal/?q=content/beaglebone-black-wireless). Made an SD Card from bone-debian-8.6-lxqt-4gb-armhf-2017-01-10-4gb.img.xz. Booted BBBW from card. >From a Windows 10 PC using TeraTERM connected on 192.168.8.1 Changed timezone. Completed Wireless configuration using connmanctl: root@beaglebone:~# connmanctl Error getting VPN connections: The name net.connman.vpn was not provided by any connmanctl> scan wifi Scan completed for wifi connmanctl> services KGNETGEAR wifi_506583d635bb_4b474e455447454152_managed_psk JandJ wifi_506583d635bb_4a616e644a_managed_psk connmanctl> agent on Agent registered connmanctl> connect wifi_506583d635bb_4b474e455447454152_managed_psk Agent RequestInput wifi_506583d635bb_4b474e455447454152_managed_psk Passphrase = [ Type=psk, Requirement=mandatory, Alternates=[ WPS ] ] WPS = [ Type=wpspin, Requirement=alternate ] Passphrase? xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Connected wifi_506583d635bb_4b474e455447454152_managed_psk connmanctl> quit root@beaglebone:~# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 50:65:83:d6:35:bb inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::5265:83ff:fed6:35bb/64 Scope:Link UP BROADCAST RUNNING MULTICAST DYNAMIC MTU:1500 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:75 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10341 (10.0 KiB) TX bytes:16478 (16.0 KiB)
root@beaglebone:~# apt-get update root@beaglebone:~# apt-get install leafpad root@beaglebone:~# apt-get install build-essential git-core device-tree-compiler root@beaglebone:~# apt-get install gdbserver Edited the /boot/uEnv.txt file. Removed the "#" from "dtb=am335x-boneblack-emmc-overlay.dtb" New line added: "cape_enable=bone_capemgr.enable_partno=BB-UART1,BB-I2C1" Rebooted the BBBW. ran ifconfig -a No wlan0 or SoftAp0. Replaced by eth0. If I try to shutdown the BBBW immediately reboots. Is there a possible repair or should I make a new SD Card? Regards, Kevin. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9ebddb97-7033-4b64-b11f-99ac20ee3596%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
