I'm using my Beaglebone Black to drive a DC motor and read a rotary encoder:
https://github.com/justinpearson/Beaglebone-motor-from-command-line/blob/master/Images/lil-motor-setup.jpg Last night when I rebooted my BBB, it shut down but didn't reboot: None of the 4 blue LEDs lit, although the blue LED by the 5V power plug did light up when I plugged it in. This behavior persisted across several plug/unplug cycles of the 5V power adapter. I was afraid I bricked my BBB. In desperation, I unplugged all the I/O (P8_33,34,35, P9_29,30,31). Then I plugged in the 5V power and it booted! Any idea why that happened, or how I could fix it in the future without unplugging all my I/O? Thanks, Justin -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/004d94de-68ee-44e6-b421-4e76d287e449%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
