Hi, while booting the beaglebone black board from SD card, boot process stuck with below errors. what could be the reason?
Terminal ready U-Boot SPL 2017.03-rc1-dirty (Feb 04 2017 - 17:38:05) Trying to boot from MMC1 reading u-boot.img reading u-boot.img U-Boot 2017.03-rc1-dirty (Feb 04 2017 - 17:38:05 +0530) CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment <ethaddr> not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw Press SPACE to abort autoboot in 2 seconds board_name=[A335BNLT] ... board_rev=[00C0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Bad device 0:2 0x82000000 ** ** Bad device 0:2 0x82000000 ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 659 bytes read in 18 ms (35.2 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... ** Invalid partition 3 ** ** Invalid partition 4 ** ** Invalid partition 5 ** ** Invalid partition 6 ** ** Invalid partition 7 ** switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... reading uEnv.txt 26 bytes read in 4 ms (5.9 KiB/s) gpio: pin 55 (gpio 55) value is 1 Loaded environment from /uEnv.txt Importing environment from mmc ... Checking if uenvcmd is set ... gpio: pin 56 (gpio 56) value is 1 Running uenvcmd ... syntax error syntax error ** Invalid partition 7 ** Checking if client_ip is set ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 33 bytes read in 37 ms (0 Bytes/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... ** Invalid partition 3 ** ** Invalid partition 4 ** ** Invalid partition 5 ** ** Invalid partition 6 ** ** Invalid partition 7 ** starting USB... USB0: Port not available. cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 BOOTP broadcast 11 BOOTP broadcast 12 BOOTP broadcast 13 BOOTP broadcast 14 BOOTP broadcast 15 BOOTP broadcast 16 BOOTP broadcast 17 BOOTP broadcast 18 BOOTP broadcast 19 BOOTP broadcast 20 BOOTP broadcast 21 BOOTP broadcast 22 BOOTP broadcast 23 BOOTP broadcast 24 BOOTP broadcast 25 BOOTP broadcast 26 BOOTP broadcast 27 BOOTP broadcast 28 BOOTP broadcast 29 Retry time exceeded; starting again missing environment variable: pxeuuid Retrieving file: pxelinux.cfg/01-d0-39-72-97-9f-4d cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/00000000 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/0000000 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/000000 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/00000 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/0000 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/000 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/00 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/0 cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/default-arm-am33xx cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/default-arm cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Retrieving file: pxelinux.cfg/default cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT ! *** ERROR: `serverip' not set Config file not found Regards, Madhu -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/29222bf4-326d-4db5-b03a-1908a821c5a8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
