Check it. Doesn't work though. My dyslexia apparently. However this is what it will look like when finished. About 7" x 5". Machine screw it to the basswood or laminate baseboard on the drone and this is the complete BBB controllable power stage.
<https://lh3.googleusercontent.com/-PpUC3RPpbrA/WJfZ-QYBRaI/AAAAAAAAAGI/-nZ-imIkH7k9jbTXhwdNMwCbfD_iKNK2QCLcB/s1600/drone_mosfetpcb1_untested.png> On Monday, January 30, 2017 at 6:19:30 PM UTC-7, woody stanford wrote: > > I posted the remote control for this in Software, but I put a bunch of > hardware in it so I thought I'd post it here. > > > https://groups.google.com/forum/#!category-topic/beagleboard/software/evSIUcuWfUY > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c93a2452-8d36-42b3-8cc4-520a85a65671%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.