Hello, I found PWM(1A, 2B, 2A) to be well suited for the software on this discussion/question in the cape_mgr on my BBB. This is what I mean. I installed those PWM pins at cape_enable=bone_capemgr.enable_partno= to make it cape_enable=bone_capemgr.enable_partno=PWM1A, i.e. and etc. There is only one section listed for me to enable these pins.
I need three PWM pins available to run this software. Seth P.S. Any advice will be okay. I am going to try and run *slots* to see if I can add some PWM pins. On Friday, April 21, 2017 at 11:28:41 PM UTC-5, Mala Dies wrote: > > Hello, > > How would I set "uenvcmd" to have full control? > > Seth > > P.S. I am asking because I set up a PWM script from an Adafruit software > thing to run a Python program to fade a Diffused LED. I am getting some > errors. The command line returns a RuntimeError. When I enable all comments > in the /boot/uEnv.txt file, I get a system that is unresponsive when I > reboot or shutdown and then boot. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b57bb9f0-6c51-45cc-a257-75d9be83dde8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.