Hey all Im using several of the SYSBOOT pins as outputs in my project. This means they are connected to the inputs of other ICs. My problem is that the Beaglebone no longer boots from uSD when connected to these peripherals.(sporadically, very rarely it does work)
My assumption was that connecting SYSBOOT pins to INPUTS of other devices shouldnt affect booting, as they are not actively being driven! Is this wrong? I've also heard that the pullup/down resistors for the SYSBOOT pins on the Beaglebone are "weak" and additional resistors should be provided externally to make them more reliable. If so, which pins require which resistor value and which type(pull up or down)? It would be nice if the solution was a simply as providing some additional pullup/down resistors! can anyone shed some light on this? Regards Claude -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/91deec96-0428-4827-a77b-7595cf7e249b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
