On Fri, Jun 30, 2017 at 7:50 PM, Sergey Manucharian <s...@ara-ler.com> wrote:
> From this thread https://e2e.ti.com/support/arm/sitara_arm/f/791/t/270060: > Modifying bit 0 of 8 bit register address 0x47401C60 it switch on/off > USB1_DRVVBUS pin > But I don't think you have to do all that. Read my post from nearly 4 years ago here: http://www.embeddedhobbyist.com/2013/07/beaglebone-black-usb-boot/ Scroll down where I talk about uEnv.txt. "usb start" should initiate power, and the driver. Note that I'm calling it first before loading files over USB. If you require in depth details, you'll have to read through the source code. But I might be able to answer *some* questions. I'm by no means a uboot expert. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORr9Me_7hnr%2BU%3Dmciv-RUi-Qu4YVG-MatjZJwAiYPsKGmw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
