Hello,
I've got a Ti DLP module and I'm trying to make it display an image from
BBBW. I updated the kernel, first to 4.4.84-ti-r120, then to 4.9.45-ti-r57.
OS packages were updated to the most recent versions. I followed the
instructions from EVM user guide, but unfortunately the projector stays
dark, and does not respond to i2cset.
With kernel 4.9.45-ti-r57 I find in boot log the following messages:
[ 2.839168] bone_capemgr bone_capemgr: Baseboard:
'A335BNLT,BWA5,1645BBWG0580'
[ 2.839198] bone_capemgr bone_capemgr:
compatible-baseboard=ti,beaglebone-black - #slots=4
[ 2.864483] bone_capemgr bone_capemgr: slot #0: No cape found
[ 2.895477] bone_capemgr bone_capemgr: slot #1: No cape found
[ 2.928171] bone_capemgr bone_capemgr: slot #2: No cape found
[ 2.958030] bone_capemgr bone_capemgr: slot #3:
'DLPDLCR2000,00A0,TI,DLPDLCR2000'
[ 2.965936] bone_capemgr bone_capemgr: initialized OK.
[ 2.967921] cpufreq: cpufreq_online: CPU0: Running at unlisted freq:
1000000 KHz
[ 2.967969] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP
for freq 1000000000 (-34)
[ 2.980996] pinctrl-single 44e10800.pinmux: pin PIN40 already requested
by 0-0070; cannot claim for panel
[ 2.981007] pinctrl-single 44e10800.pinmux: pin-40 (panel) status -22
[ 2.981015] pinctrl-single 44e10800.pinmux: could not request pin 40
(PIN40) from group pinmux_bb_lcd_lcd_pins on device pinctrl-single
[ 2.981022] panel panel: Error applying setting, reverse things back
[ 2.981051] panel: probe of panel failed with error -22
[ 2.982055] bone_capemgr bone_capemgr: slot #3: dtbo
'DLPDLCR2000-00A0.dtbo' loaded; overlay id #0
Capemanager loaded only the display overlay:
root@beaglebone:~# cat /sys/devices/platform/bone_capemgr/slots
0: PF---- -1
1: PF---- -1
2: PF---- -1
3: P---L- 0 DLPDLCR2000,00A0,TI,DLPDLCR2000
i2cset fails with write error:
root@beaglebone:/opt/scripts/tools# i2cset -y 2 0x1b 0x0b 0x00 0x00 0x00
0x00 i
Error: Write failed
To make sure that no overlays interfere with operation of the display, I
disabled the universal cape in uEnv.txt, but it did not help.
The module is powered from an external 5V power supply and displays test
image when powered on without BBBW.
Full boot log is attached.
Thanks,
Jacek.
--
Given a choice between two theories, take the one which is funnier
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/CAA2oDvZKtqYngMHPPwDXcpJoKFnhqdL3eoox-t%3D15Qk6AtohCA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.45-ti-r57 (root@b8-am57xx-beagle-x15-2gb) (gcc
version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Fri Aug 25 22:57:00 UTC 2017
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black Wireless
[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c13e0cc0, node_mem_map
df961000
[ 0.000000] Normal zone: 1148 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon)
[ 0.000000] percpu: Embedded 15 pages/cpu @df929000 s32000 r8192 d21248
u61440
[ 0.000000] pcpu-alloc: s32000 r8192 d21248 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 129412
[ 0.000000] Kernel command line: console=ttyO0,115200n8
root=UUID=ac4731db-c4db-463f-9129-07e6746b98ba ro rootfstype=ext4 rootwait
coherent_pool=1M quiet cape_universal=disable
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 441804K/522240K available (12288K kernel code, 1102K
rwdata, 4140K rodata, 1024K init, 736K bss, 31284K reserved, 49152K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0d00000 (13280 kB)
.init : 0xc1200000 - 0xc1300000 (1024 kB)
.data : 0xc1300000 - 0xc1413ac0 (1103 kB)
.bss : 0xc1415000 - 0xc14cd1c0 ( 737 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
89478484971ns
[ 0.000033] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 79635851949 ns
[ 0.000044] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000897] clocksource_probe: no matching clocksources found
[ 0.001388] Console: colour dummy device 80x30
[ 0.001413] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.001419] This ensures that you still see kernel messages. Please
[ 0.001423] update your kernel commandline.
[ 0.001447] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ 0.046671] pid_max: default: 32768 minimum: 301
[ 0.046974] Security Framework initialized
[ 0.046986] Yama: becoming mindful.
[ 0.047027] AppArmor: AppArmor disabled by boot time parameter
[ 0.047241] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.047250] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.048455] CPU: Testing write buffer coherency: ok
[ 0.048524] ftrace: allocating 37796 entries in 111 pages
[ 0.155823] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.155895] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.202695] Brought up 1 CPUs
[ 0.202715] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ 0.202721] CPU: All CPU(s) started in SVC mode.
[ 0.204310] devtmpfs: initialized
[ 0.227046] VFP support v0.3: implementor 41 architecture 3 part 30 variant
c rev 3
[ 0.227580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.227605] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.231375] xor: measuring software checksum speed
[ 0.270712] arm4regs : 1217.000 MB/sec
[ 0.310659] 8regs : 1083.000 MB/sec
[ 0.350659] 32regs : 1088.000 MB/sec
[ 0.390659] neon : 1666.000 MB/sec
[ 0.390666] xor: using function: neon (1666.000 MB/sec)
[ 0.390683] pinctrl core: initialized pinctrl subsystem
[ 0.392235] NET: Registered protocol family 16
[ 0.396060] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.422626] omap_hwmod: debugss: _wait_target_disable failed
[ 0.486703] cpuidle: using governor ladder
[ 0.498685] cpuidle: using governor menu
[ 0.507221] OMAP GPIO hardware version 0.1
[ 0.514020] GPIO line 106 (LS_BUF_EN) hogged as output/high
[ 0.528032] No ATAGs?
[ 0.528055] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.528353] omap4_sram_init:Unable to allocate sram needed to handle errata
I688
[ 0.528362] omap4_sram_init:Unable to get sram pool needed to handle errata
I688
[ 0.638764] raid6: int32x1 gen() 229 MB/s
[ 0.706738] raid6: int32x1 xor() 175 MB/s
[ 0.774699] raid6: int32x2 gen() 303 MB/s
[ 0.842695] raid6: int32x2 xor() 198 MB/s
[ 0.910842] raid6: int32x4 gen() 284 MB/s
[ 0.978667] raid6: int32x4 xor() 199 MB/s
[ 1.046847] raid6: int32x8 gen() 282 MB/s
[ 1.094657] random: fast init done
[ 1.114687] raid6: int32x8 xor() 186 MB/s
[ 1.182660] raid6: neonx1 gen() 1457 MB/s
[ 1.250671] raid6: neonx1 xor() 843 MB/s
[ 1.318657] raid6: neonx2 gen() 1877 MB/s
[ 1.386659] raid6: neonx2 xor() 1179 MB/s
[ 1.454667] raid6: neonx4 gen() 1916 MB/s
[ 1.522668] raid6: neonx4 xor() 1197 MB/s
[ 1.590701] raid6: neonx8 gen() 1184 MB/s
[ 1.658658] raid6: neonx8 xor() 840 MB/s
[ 1.658665] raid6: using algorithm neonx4 gen() 1916 MB/s
[ 1.658670] raid6: .... xor() 1197 MB/s, rmw enabled
[ 1.658676] raid6: using intx1 recovery algorithm
[ 1.668817] edma 49000000.edma: TI EDMA DMA engine driver
[ 1.673804] SCSI subsystem initialized
[ 1.674849] libata version 3.00 loaded.
[ 1.675194] usbcore: registered new interface driver usbfs
[ 1.675266] usbcore: registered new interface driver hub
[ 1.675382] usbcore: registered new device driver usb
[ 1.675966] omap_i2c 44e0b000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ 1.676023] omap_i2c 4819c000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
[ 1.676140] media: Linux media interface: v0.10
[ 1.676208] Linux video capture interface: v2.00
[ 1.676300] pps_core: LinuxPPS API ver. 1 registered
[ 1.676306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 1.676329] PTP clock support registered
[ 1.677180] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 1.678579] NetLabel: Initializing
[ 1.678591] NetLabel: domain hash size = 128
[ 1.678596] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.678770] NetLabel: unlabeled traffic allowed by default
[ 1.679420] clocksource: Switched to clocksource timer1
[ 1.807568] VFS: Disk quotas dquot_6.6.0
[ 1.807705] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.822765] NET: Registered protocol family 2
[ 1.823916] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.823961] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.824019] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.824091] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.824112] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.824322] NET: Registered protocol family 1
[ 1.833253] RPC: Registered named UNIX socket transport module.
[ 1.833264] RPC: Registered udp transport module.
[ 1.833269] RPC: Registered tcp transport module.
[ 1.833274] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.833292] PCI: CLS 0 bytes, default 64
[ 1.833943] Unpacking initramfs...
[ 2.266964] Freeing initrd memory: 5584K
[ 2.267779] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
counters available
[ 2.270742] audit: initializing netlink subsys (disabled)
[ 2.270844] audit: type=2000 audit(2.196:1): initialized
[ 2.276534] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 2.276744] zbud: loaded
[ 2.281983] NFS: Registering the id_resolver key type
[ 2.282031] Key type id_resolver registered
[ 2.282037] Key type id_legacy registered
[ 2.282055] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.282467] fuse init (API version 7.26)
[ 2.282907] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 2.283191] orangefs_init: module version upstream loaded
[ 2.283198] SGI XFS with ACLs, security attributes, realtime, no debug
enabled
[ 2.302976] Key type asymmetric registered
[ 2.302993] Asymmetric key parser 'x509' registered
[ 2.303128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
247)
[ 2.307621] io scheduler noop registered
[ 2.307632] io scheduler deadline registered
[ 2.307740] io scheduler cfq registered (default)
[ 2.309361] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 2.313269] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 2.314674] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 2.318101] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud
= 3000000) is a 8250
[ 2.331029] console [ttyS0] enabled
[ 2.332209] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 159, base_baud
= 3000000) is a 8250
[ 2.333759] [drm] Initialized
[ 2.338220] libphy: Fixed MDIO Bus: probed
[ 2.340911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.340971] ehci-pci: EHCI PCI platform driver
[ 2.341044] ehci-platform: EHCI generic platform driver
[ 2.341249] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.341784] usbcore: registered new interface driver usb-storage
[ 2.344394] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 2.350234] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 2.354138] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 2.354178] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus
number 1
[ 2.354518] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.354530] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.354538] usb usb1: Product: MUSB HDRC host driver
[ 2.354545] usb usb1: Manufacturer: Linux 4.9.45-ti-r57 musb-hcd
[ 2.354553] usb usb1: SerialNumber: musb-hdrc.1
[ 2.355673] hub 1-0:1.0: USB hub found
[ 2.355740] hub 1-0:1.0: 1 port detected
[ 2.366680] mousedev: PS/2 mouse device common for all mice
[ 2.369046] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 2.369375] i2c /dev entries driver
[ 2.371151] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 2.372670] cpuidle: enable-method property 'ti,am3352' found operations
[ 2.373684] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 2.505876] mmc1: new high speed MMC card at address 0001
[ 2.511078] mmcblk1: mmc1:0001 S10004 3.56 GiB
[ 2.515739] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
[ 2.520286] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
[ 2.521817] mmcblk1: p1
[ 2.573143] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.573263] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.573920] usbcore: registered new interface driver usbhid
[ 2.573929] usbhid: USB HID core driver
[ 2.574342] remoteproc remoteproc0: wkup_m3 is available
[ 2.576287] NET: Registered protocol family 10
[ 2.577816] mip6: Mobile IPv6
[ 2.577838] NET: Registered protocol family 17
[ 2.579059] Key type dns_resolver registered
[ 2.579068] mpls_gso: MPLS GSO support
[ 2.581499] omap_voltage_late_init: Voltage driver support not added
[ 2.588362] omap_hsmmc 47810000.mmc: card claims to support voltages below
defined range
[ 2.588733] PM: Cannot get wkup_m3_ipc handle
[ 2.593356] ThumbEE CPU extension supported.
[ 2.593384] Registering SWP/SWPB emulation handler
[ 2.594597] registered taskstats version 1
[ 2.594744] zswap: loaded using pool lzo/zbud
[ 2.600973] Btrfs loaded, crc32c=crc32c-generic
[ 2.605810] mmc2: new high speed SDIO card at address 0001
[ 2.634202] Key type encrypted registered
[ 2.676761] input: tps65217_pwr_but as
/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
[ 2.677345] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 2.677865] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.802305] tda998x 0-0070: found TDA19988
[ 2.803802] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[ 2.803823] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.803828] [drm] No driver support for vblank timestamp query.
[ 2.804200] tilcdc 4830e000.lcdc: No connectors reported connected with modes
[ 2.804222] [drm] Cannot find any crtc or sizes - going 1024x768
[ 2.812580] Console: switching to colour frame buffer device 128x48
[ 2.817429] tilcdc 4830e000.lcdc: fb0: frame buffer device
[ 2.828455] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 2.830422] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.830777] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.831119] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.831669] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.831722] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 2.833159] remoteproc remoteproc0: powering up wkup_m3
[ 2.833185] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf,
size 217148
[ 2.833441] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 2.833461] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
[ 2.839168] bone_capemgr bone_capemgr: Baseboard:
'A335BNLT,BWA5,1645BBWG0580'
[ 2.839198] bone_capemgr bone_capemgr:
compatible-baseboard=ti,beaglebone-black - #slots=4
[ 2.864483] bone_capemgr bone_capemgr: slot #0: No cape found
[ 2.895477] bone_capemgr bone_capemgr: slot #1: No cape found
[ 2.928171] bone_capemgr bone_capemgr: slot #2: No cape found
[ 2.958030] bone_capemgr bone_capemgr: slot #3:
'DLPDLCR2000,00A0,TI,DLPDLCR2000'
[ 2.965936] bone_capemgr bone_capemgr: initialized OK.
[ 2.967921] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1000000
KHz
[ 2.967969] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for
freq 1000000000 (-34)
[ 2.980996] pinctrl-single 44e10800.pinmux: pin PIN40 already requested by
0-0070; cannot claim for panel
[ 2.981007] pinctrl-single 44e10800.pinmux: pin-40 (panel) status -22
[ 2.981015] pinctrl-single 44e10800.pinmux: could not request pin 40 (PIN40)
from group pinmux_bb_lcd_lcd_pins on device pinctrl-single
[ 2.981022] panel panel: Error applying setting, reverse things back
[ 2.981051] panel: probe of panel failed with error -22
[ 2.982055] bone_capemgr bone_capemgr: slot #3: dtbo 'DLPDLCR2000-00A0.dtbo'
loaded; overlay id #0
[ 3.019678] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency
changed to: 800000 KHz
[ 3.020431] PM: bootloader does not support rtc-only!
[ 3.021555] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01
00:00:00 UTC (946684800)
[ 3.021569] of_cfs_init
[ 3.021727] of_cfs_init: OK
[ 3.022353] PM: Hibernation image not present or could not be loaded.
[ 3.022499] wlan-en-regulator: disabling
[ 3.025315] Freeing unused kernel memory: 1024K
[ 8.278321] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode.
Opts: (null)
[ 8.784678] systemd[1]: System time before build time, advancing clock.
[ 8.839382] systemd[1]: Failed to insert module 'kdbus': Function not
implemented
[ 8.889144] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 8.890105] systemd[1]: Detected architecture arm.
[ 8.891771] systemd[1]: Set hostname to <beaglebone>.
[ 9.619355] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 9.620475] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.621727] systemd[1]: Created slice User and Session Slice.
[ 9.622146] systemd[1]: Listening on udev Kernel Socket.
[ 9.623119] systemd[1]: Created slice System Slice.
[ 9.623982] systemd[1]: Listening on udev Control Socket.
[ 9.624146] systemd[1]: Reached target Swap.
[ 10.901781] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
[ 11.425667] systemd-journald[619]: Received request to flush runtime journal
from PID 1
[ 17.236598] random: crng init done
[ 20.100557] using random self ethernet address
[ 20.100580] using random host ethernet address
[ 20.190565] using random self ethernet address
[ 20.190586] using random host ethernet address
[ 20.385624] Mass Storage Function, version: 2009/09/11
[ 20.385652] LUN: removable file: (no medium)
[ 20.612632] usb0: HOST MAC 50:65:83:da:d9:a1
[ 20.616303] usb0: MAC 50:65:83:da:d9:a2
[ 20.624625] usb1: HOST MAC 50:65:83:da:d9:a4
[ 20.631725] usb1: MAC 50:65:83:da:d9:a5
[ 21.022316] configfs-gadget gadget: high-speed config #1: c
[ 44.334671] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 49.727042] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 49.917930] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 49.933975] omap-aes 53500000.aes: will run requests pump with realtime
priority
[ 50.852293] asoc-simple-card sound: hdmi-hifi.0 <-> 48038000.mcasp mapping ok
[ 58.154714] Bluetooth: Core ver 2.22
[ 58.154850] NET: Registered protocol family 31
[ 58.154859] Bluetooth: HCI device and connection manager initialized
[ 58.154893] Bluetooth: HCI socket layer initialized
[ 58.154911] Bluetooth: L2CAP socket layer initialized
[ 58.154998] Bluetooth: SCO socket layer initialized
[ 58.201702] Bluetooth: HCI UART driver ver 2.3
[ 58.201726] Bluetooth: HCI UART protocol H4 registered
[ 58.201734] Bluetooth: HCI UART protocol BCSP registered
[ 58.201741] Bluetooth: HCI UART protocol LL registered
[ 58.201748] Bluetooth: HCI UART protocol ATH3K registered
[ 58.201756] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 58.202104] Bluetooth: HCI UART protocol Broadcom registered
[ 58.202113] Bluetooth: HCI UART protocol QCA registered
[ 60.000288] ti-pruss 4a300000.pruss: creating PRU cores and other child
platform devices
[ 60.078836] irq: no irq domain found for
/ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 !
[ 60.088587] irq: no irq domain found for
/ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 !
[ 61.416167] remoteproc remoteproc1: 4a334000.pru0 is available
[ 61.416328] pru-rproc 4a334000.pru0: PRU rproc node
/ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a334000 probed successfully
[ 61.489984] remoteproc remoteproc2: 4a338000.pru1 is available
[ 61.490121] pru-rproc 4a338000.pru1: PRU rproc node
/ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a338000 probed successfully
[ 61.746239] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 61.746260] Bluetooth: BNEP filters: protocol multicast
[ 61.746293] Bluetooth: BNEP socket layer initialized
[ 63.257316] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 63.377939] wlcore: loaded
[ 63.887142] wlcore: PHY firmware version: Rev 8.2.0.0.236
[ 63.946673] wlcore: firmware booted (Rev 8.9.0.0.69)
[ 63.985255] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 65.453285] wlan0: authenticate with 00:1e:52:7b:d1:1e
[ 65.464411] wlan0: send auth to 00:1e:52:7b:d1:1e (try 1/3)
[ 65.505815] wlan0: authenticated
[ 65.511834] wlan0: associate with 00:1e:52:7b:d1:1e (try 1/3)
[ 65.516592] wlan0: RX AssocResp from 00:1e:52:7b:d1:1e (capab=0x1431
status=0 aid=6)
[ 65.539632] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 65.545519] wlan0: associated
[ 65.804856] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by
00:1e:52:7b:d1:1e
[ 65.852909] wlcore: Association completed.
