On Thursday, 14 September 2017 17:25:09 UTC+3, Ritisha Shettigar wrote: > > I have intefaced RTC DS1307 with Beaglbone. However, after the beaglebone > boots up, its time is reset and RTC takes this reset time. Use of NTP would > not be feasible since Beaglebone would be used in a remote location with no > internet connection. What would be the solution to this issue ? >
There's a reasonably easy hack: https://learn.adafruit.com/adding-a-real-time-clock-to-beaglebone-black/set-rtc-time A proper solution would probably involve a kernel change to replace the default RTC device (which is currently the chip's nearly useless internal one at /dev/rtc0). I'd love to figure out how that works, as I need to do the same thing. -- Kind regards, Tarmo Kuuse -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b98c9c08-c8e1-4383-be4c-da4ac80366ae%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.