What are you trying to do? To use CCS in bare board mode, you need an SDCard that sets up the board to work with CCS. From what I recall, you need more than just the DDR3 GEL file to get BBB working.
Regards, John > On Sep 19, 2017, at 1:45 PM, tlsmith3...@gmail.com wrote: > > Running into an issue where we were able to see console output on the serial > console when no JTAG or CCS was connected. After connecting CCS to JTAG and > updating the DDR3 gel file we were able to see the output over the CCS serial > console. After disconnecting the JTAG and CCS and doing a board reset, we > can no longer see anything over the original serial console. Disconnected > the serial console, did hardware reset, unplugged the BBB from the power > supply and still the BBB simply appears hung or redirecting output or simply > not responding CPU hung after power is applied. > > What is causing this condition. It is fine when JTAG is connected and using > CCS. But board appears hung with no CCCs or otherwise on reboot when JTAG and > CCS is not connected. What is taking place? > > -- > For more options, visit http://beagleboard.org/discuss > <http://beagleboard.org/discuss> > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com > <mailto:beagleboard+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/455153ef-0552-4de3-9ed8-f6f237cc4c7e%40googlegroups.com > > <https://groups.google.com/d/msgid/beagleboard/455153ef-0552-4de3-9ed8-f6f237cc4c7e%40googlegroups.com?utm_medium=email&utm_source=footer>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/FC90A529-7387-4C3E-9DFF-75500C698D74%40gmail.com. For more options, visit https://groups.google.com/d/optout.