Will the same Ethernet overlay work for both the ETH Click and the ETH-WIZ Click?
Since the 10/100 Mb Ethernet (ETH WIZ) Click board is $19, and the 10 Mb only ETH Click board is $24, I bought the 10/100 ETH WIZ click board. --- Graham == On Wed, Sep 27, 2017 at 1:56 PM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Wed, Sep 27, 2017 at 8:20 AM, Graham <gra...@flex-radio.com> wrote: > > Your naming proposal seems appropriate. > > > > > > The mikro Click boards seem to be good for experimenting with one new > part > > or function. > > Microchip is supporting them on their new "Curiosity" series dev boards, > > too. > > Great for learning to program an I2C, SPI or UART interface. > > > > Easy to layout unique little PCBs fitting that footprint. I have already > > done that for a unique ADC and a 6 pin console serial port adapter. > > > > Where it starts to fall apart is when you want to use more than one or > two > > "Click" boards worth of functionality, although mikro does have a > separate > > four-up universal click board motherboard. > > I've started listing working boards here: > > https://github.com/beagleboard/pocketbeagle/wiki/ > mikroBus%E2%84%A2-Click-Boards > > I've got a spi and i2c example working.. So it should be easy for > others to add additional boards. ;) > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/beagleboard/xXIXmpVm9is/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/CAOCHtYjHc-cDSeiV3qyjfVv%3Da_VzNX5JvbycYj-hChXH%2BrGjGA% > 40mail.gmail.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CANN_KV6WHnzme-mfHHKcEuQ2f0qR82nUBxyPA0KS0AeRWSVXdA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.