I have installed my headers on the bottom. They do not fit on top. I also figure that this is best so I can heatsink the Octavo chip if needed.
On Friday, September 29, 2017 at 8:05:14 AM UTC-4, Giulio Moro wrote: > > I got myself a PocketBeagle and I realized that I cannot fit headers on > the CPU components side because there is not enough clearance between the > pads and the Octavo chip for the plastic of the header to fit in. I am > using headers like these https://www.adafruit.com/product/2076, these > https://www.mouser.co.uk/ProductDetail/Gravitech/20Mx2-254mm or sockets > like these sockets > https://www.mouser.co.uk/ProductDetail/Gravitech/4Fx2-254mm/ > None of these would fit. > > The alternative would be to place the sockets on the bottom side and put > the solder on the components side, but it does not seem a great option. Are > there any sockets/headers that you use that fit on the components side? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/91fcaee3-7750-4418-9cf6-dced55864995%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.