Graham, thanks for the reply. On Sunday, October 15, 2017 at 6:29:34 AM UTC-7, Graham wrote: > > > Depending on which Beaglexxxx distribution, and what things you have > ripped out of them, they can take anywhere from 12 seconds to multiple > minutes to boot. > So, either you need to create a very special custom uBoot to initialize > your ESC's, or add a power switch, that is under user software control, > that is not turned on until after the system has booted, and you can then > initialize the ESC's within your alloted time, after turning on the power > switch. > > --- Graham > > == >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7c049b2a-35a1-4373-9677-28d8be7fc43f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.