On Friday, September 29, 2017 at 10:35:42 AM UTC-5, Jason Kridner wrote: > > > I'm looking for a good Fritzing element for the USB type-A, but it is > largely the same except that ID and GND are tied together (connector is > only 4-pin). >
You're welcome to use the picture here [1]. The part can be found in this bin [2], and I modeled it after this one from eBay [3]. Thanks for the info. My USB WiFi adapter works great connected this way. [1]: https://github.com/zultron/fritzing-parts/tree/master/pocketbeagle-usb-type-a [2]: https://github.com/zultron/fritzing-parts/blob/master/Collected-Parts.fzb [3]: https://www.ebay.com/itm/382237126536 John -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a7ddc245-688a-47da-8771-9fa5b2dff3c1%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
