Dear BeagleBoard Member,
Looks like the board denies USB Hub,
====
root@beaglebone:~# udevd[125]: worker [133]
/devices/platform/ocp/47400000.usb/t
udevd[125]: seq 1103
'/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrcd
udevd[125]: worker [130]
/devices/platform/ocp/47400000.usb/47401c00.usb/musb-ht
udevd[125]: seq 1109
'/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrcd
udevd[125]: worker [130] terminated by signal 9 (Killed)
udevd[125]: worker [130] failed while handling
'/devices/platform/ocp/47400000.'
usb 1-1.4: 5:0: cannot get min/max values for control 2 (id 5)
usbcore: registered new interface driver snd-usb-audio
udevd[125]: worker [133] terminated by signal 9 (Killed)
udevd[125]: worker [133] failed while handling
'/devices/platform/ocp/47400000.'
=====
The hub is ok when I put it on my computer ?
Any clues ?
On 23/10/17 12:39, Robert Nelson wrote:
On Oct 22, 2017 10:52 PM, "Riko" <antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
It's working until root shell but, always miss USB drive
initialization.
I got no idea why, looks like there's a voltage drop.
Is it ok, if I remove FB8 from the board ? It's connected to T18
on the chip
Probably not.
Which board?
Regards,
--
------------------------------------------------------------------------
*/*****
Sent By
Ubuntu Linux 16.04 LTS
Kernel 4.4.0-92-generic
Kind Regards,
Riko Ho
==========
谢谢从何金汉
*****/*
------------------------------------------------------------------------
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/b158e3c0-f5b6-4c8d-c1ef-4eaee2796e5a%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
