*Hi!* *I have this /boot/uEnv.txt on my SD Card (beagleBone Green):*
#Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 uname_r=4.4.91-ti-r133 #uuid= #dtb= ###U-Boot Overlays### ###Documentation: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays ###Master Enable #enable_uboot_overlays=1 ### ###Overide capes with eeprom #uboot_overlay_addr0=/lib/firmware/<file0>.dtbo #uboot_overlay_addr1=/lib/firmware/<file1>.dtbo #uboot_overlay_addr2=/lib/firmware/<file2>.dtbo #uboot_overlay_addr3=/lib/firmware/<file3>.dtbo ### ###Additional custom capes #uboot_overlay_addr4=/lib/firmware/<file4>.dtbo #uboot_overlay_addr5=/lib/firmware/<file5>.dtbo #uboot_overlay_addr6=/lib/firmware/<file6>.dtbo #uboot_overlay_addr7=/lib/firmware/<file7>.dtbo ### ###Custom Cape #dtb_overlay=/lib/firmware/<file8>.dtbo ### ###Disable auto loading of virtual capes (emmc/video/wireless/adc) #disable_uboot_overlay_emmc=1 #disable_uboot_overlay_video=1 #disable_uboot_overlay_audio=1 #disable_uboot_overlay_wireless=1 #disable_uboot_overlay_adc=1 ### ###PRUSS OPTIONS ###pru_rproc (4.4.x-ti kernel) #uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-4-TI-00A0.dtbo ###pru_uio (4.4.x-ti & mainline/bone kernel) #uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo ### ###Cape Universal Enable #enable_uboot_cape_universal=1 ### ###Debug: disable uboot autoload of Cape #disable_uboot_overlay_addr0=1 #disable_uboot_overlay_addr1=1 #disable_uboot_overlay_addr2=1 #disable_uboot_overlay_addr3=1 ### ###U-Boot fdt tweaks... #uboot_fdt_buffer=0x60000 ###U-Boot Overlays### #cmdline=coherent_pool=1M net.ifnames=0 quiet cmdline=coherent_pool=1M quiet init=/lib/systemd/systemd #In the event of edid real failures, uncomment this next line: #cmdline=coherent_pool=1M net.ifnames=0 quiet video=HDMI-A-1:1024x768@60e ##Example v3.8.x #cape_disable=capemgr.disable_partno= #cape_enable=capemgr.enable_partno= ##Example v4.1.x cape_disable=bone_capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G #cape_enable=bone_capemgr.enable_partno= ##enable Generic eMMC Flasher: ##make sure, these tools are installed: dosfstools rsync #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh dtb=am335x-boneblack-overlay.dtb *The only uncommented line are:* *cape_disable=bone_capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G* *dtb=am335x-boneblack-overlay.dtb* *But the P8_3...P8_6 and P8_20...P8_25 pins do not work. Ineed these pins. What am I doing wrong?* > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c6bc3647-db4f-4f55-8fd7-2576806239fa%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.