Yes, try some other power supplies. and if they stay between 4.75 and 5.25 under all the different load conditions a BBB can create, it will work fine.
USB power is highly variable from computer to computer. Sometimes it works fine, sometimes it does not. USB-1 was 0.5 Amps max, not enough to run a BBB, while booting or updating the eMMC. USB-2 is 0.9 Amps, about enough to handle the peak current from a BBB. The Voltage limits for USB are 4.5 to 5.5 Volts. No margin if at the limits under full load. --- Graham == On Wed, Nov 8, 2017 at 12:35 PM, <pekkajrouv...@gmail.com> wrote: > thanks for the answer. i think i need to find other power and test with > that. If that new one stays 4.75 - 5.25 it will working normally then? > how about that, im thinking to run it with USB power via USB connector. is > it ok? > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CANN_KV45Zi%3DOGhTxVzsd2iKECTHBAQBLp_yy-sGVSbmfcD8t9A%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.