Hello All,
I am able to transmit data in UART4 (P2_5 , P2_7) Now i am trying to transmit data in UART 2 (P1.8, P1.10) in Pocket beagle Bone. I can not see anything coming out . Here is the steps i followed. Version : debian@beaglebone:~$ cat /etc/debian_version 9.1 Enabled UART2 in uEnv.txt debian@beaglebone:~$ cd /boot debian@beaglebone:/boot$ sudo nano uEnv.txt cape_enable=bone_capemgr.enable_partno=BB-UART1,BB-UART4,BB-UART5,BB-UART2 cape_disable=bone_capemgr.disable_partno= debian@beaglebone:~$ ls -al /dev/ttyS* crw--w---- 1 root tty 4, 64 Sep 21 21:01 /dev/ttyS0 crw-rw---- 1 root dialout 4, 65 Sep 21 21:01 /dev/ttyS1 crw-rw---- 1 root dialout 4, 66 Sep 21 21:01 /dev/ttyS2 crw-rw---- 1 root dialout 4, 67 Sep 21 21:01 /dev/ttyS3 crw-rw---- 1 root dialout 4, 68 Sep 21 21:01 /dev/ttyS4 crw-rw---- 1 root dialout 4, 69 Sep 21 21:01 /dev/ttyS5 Here is the code, Code : #include <stdio.h> #include <string.h> #include <fcntl.h> #include <termios.h> #include <unistd.h> void main (void) { int file, i; unsigned char receive[100]; // declare a buffer for receiving data char buf[20]; size_t nbytes; ssize_t bytes_written; printf("UART: Transmission Started.\n"); if ((file = open("/dev/ttyS2", O_RDWR))<0) { printf("UART: Failed to open the file.\n"); return; } // struct termios options; // the termios structure is vital tcgetattr(file, &options); // sets the parameters associated with file // Set up the communications options: // 9600 baud, 8-bit, enable receiver, no modem control lines options.c_cflag = B9600 | CS8 | CREAD | CLOCAL; options.c_iflag = IGNPAR | ICRNL; // ignore partity errors, CR -> newline tcflush(file, TCIFLUSH); // discard file information not transmitted tcsetattr(file, TCSANOW, &options); // changes occur immmediately strcpy(buf, "This is a test\n"); nbytes = strlen(buf); while (1) { bytes_written = write(file, buf, nbytes); sleep(10); } close(file); I hope someone can help me . -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e8e94e3d-92d0-4230-b272-3e6aca3b92f1%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.