On Wed, Dec 6, 2017 at 10:08 AM, <wkul...@gmail.com> wrote: > My Beaglebone White died after about 3 years of 24/7 use. I downloaded the > "latest" Debian Stretch image > (bone-debian-9.2-iot-armhf-2017-10-10-4gb.img.xz) and wrote a new SD card. > Had no trouble copying over my code and building it. Edited the > /boot/uEnv.txt file to try and make the pinmux match the BBW with these > changes: > > uncomment: disable_uboot_overlay_emmc=1 > comment: > uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-4-TI-00A0.dtbo > > Everything seems fine and after I start my code all the > /sys/class/gpio/gpio* direction and value stuff looks correct, but when I > attach my hardware the system won't boot.
I blame your hardware.. Plug in a usb-serial adapter and share with us your system bootup.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhZqhR%3Dnr9pqnZgkAao1wPTNgGWDM2EhPBi_J4Jmb636w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.