I've installed the latest, bone-debian-9.2-iot-armhf-2017-10-10-4gb.img.xz to and SD card and have been playing with it on my three Beaglebones Original Beaglebone "white" Rev A6, Beaglebone Black Rev A5A, and Beaglebone Green.
I've not changed anything in /boot/uEnv.txt, I've just moved the SD card among the three systems and booted. All seem to work fine so far except ... Connecting to the node-red server at beaglebone:1880 I see the node-red-node-beaglebone nodes in the palette on the BBB & BBG, but on the BBW they are not there. They show up in the palette manager but can't be enabled. Any hardware reason for this? Is there a way I can correct it? I didn't see any comments in /boot/uEnv.txt that looked relevant to the issue, but its a lot different from a couple of years ago when I last did anything with the Beaglebones, best initial bootup experience yet for the Beaglebones except for this issue. I don't think the BBW is even being sold anymore, but hopefully there would be some support for what is still out there, Mine has a broken "power" switch and can't be rebooted after a shutdown without removing 5V power and re-powering, but otherwise seems OK. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b3dd069d-27ee-4fce-ac9c-c703619a30de%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
