Always show- [ 3.594762] bone_capemgr bone_capemgr: loader: failed to load slot-5 BB-BONE-AUDI-03:00A0 (prio 0)
On Monday, December 11, 2017 at 2:21:42 PM UTC+5:30, ritesh...@kritikalsolutions.com wrote: > > Hi, > > *Info:* > I am using BeagleBone Green Wireless(BBGW) with SITARA AM3358xx > processor on board for audio driver. For that I am using external > tlv320dac3100 codec for audio speaker. > As you know, this codec is I2C controlled I2S(MCASP) based. So I want to > enable McAsp0(I2S) > pins and I2C1 as hardware interface. I2C1 is reflected successfully by > making an entry in /boot/uEnv.txt but unable to show any Audio device by > default while throwing command *aplay -L* on the terminal. > > Then i start taking action as followed below- > > *Actions Taken:* > As discussed in forum - > opened the BB-BONE-AUDI-02-00A0.dts file and edited > according to my hardware connections. but unable to compile showing error > in header files so i commented the header file and macros used for > pinmuxing and used the hard coded values for that. Finally compiled and > copied the .dtbo file into /lib/firmware/. then reboot and saw the dmesg- > > *It is showing failed to load BB-BONE-AUDI-02 in slots.* > > *Hardware Connection: PIN Muxing:* > P8.37 - mcasp0-aclkx 0x0C0 0x73 > P8.38 - mcasp0-fsx 0x0C4 0x77 > P8.34 - mcasp0-axr2 0x0CC 0x85 > P8.37 - mcasp0-ahclkx 0x0DC 0x89 > P8.37 - mcasp0-axr0 0x0C8 0x81 > > Please help me to resolve this asap. I am stucked badly. If possible > please provide step by step procedure to this. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/03b46ecf-b296-430e-9739-85882ebcd445%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
