I soldered the power-wires of an USB-cable to P1/pin 1 and P1/pin 16. So USB was not used at all in this scenario.
Regarding SYS_RESETn: I found a signal named RESET_OUT at P2/pin 26 - could this the equivalent to SYS_RESETn? Unfortunately I have no idea how to measure if it could be it or not... On Tuesday, December 12, 2017 at 3:03:45 PM UTC+1, Graham wrote: > > Mike: > > Thanks for the comments. > > Were you using the USB0 connector on the board (which is hardwired to > P1-pin7), or was it an independent off board connector? > > --- Graham > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/955b31e7-369f-48ac-a922-0f56401663d5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
