Hi, I´ve installed this image: bone-debian-8.4-iot-armhf-2016-05-13-4gb.img
> The Kernel Version is: 4.4.9-ti-r25 I followed your instructions and I don´t get any error or warning messages. Everything looks good. > On one side is BeagleBone Black, on other side is IXXAT CAN-USB adapter and then Notebook(Test with software Mini Mon V3). The Can-Transceiver is between. When I send a message , I only see something like a one "clock" (no full message) on the oscilloscope(but only once at the start). A message is not sent. On the oscilloscope(measuered on TX-pin on BBB-P9_26 or P9_20) I don´t see message which I have sent. *Why can´t the message be created on the pin?* If you can, please help me! Thank you and best regards, Math > <https://github.com/derekmolloy/boneDeviceTree.git> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cc6c6328-8271-4140-af99-8b6ddb548ef7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.