Hi Alek, I think you need more than a 1A supply. I use one of these https://www.amazon.co.uk/Charger-RAVPower-4-Port-Charge-Smartphones-White/dp/B018Q7HNRQ/ref=sr_1_4 to power 4 BBGWs. I suspect the board is suffering a brown out when the WL1835 does its short calibration (a couple of ms but at ~500mA). Iain
On Tuesday, 9 January 2018 13:27:52 UTC, Alek Mabry wrote: > > > Hello! > > My BBGW consistently turns itself off, no matter what power supply or > image I use. It consistently acted the same on both of my BBGW. > > With default factory configuration: > https://youtu.be/fBhOSkkfCps > > With latest image (Debian 8.6 2016-11-06 4GB SD SeeedStudio IoT > <https://debian.beagleboard.org/images/bone-debian-8.6-seeed-iot-armhf-2016-11-06-4gb.img.xz>image > > for SeeedStudio BeagleBone Green Wireless > <http://beagleboard.org/green-wireless>): > https://youtu.be/nRTk8SZuWlI > > Somehow I can get it to work if I plug my serial connector in. But then > after the stage where the BBGW shuts off the LED pattern flashes like this: > > On | Off | On | Off > Off | On | Off| On > > I am able to connect to the board in this stage. I've tested both 500ma > and 1A USB chargers and none of them seem to work. > > Thanks for any help, > Alek > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/925c0fca-a5ca-4387-9b52-708e9fbc0f36%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
