On Sat, Feb 24, 2018 at 4:51 AM, <egavri...@centrance.com> wrote: > Hi Robert, > > By the way, I'm curious why don't you just use 00:00:00:00:00:00 as a MAC > instead? If you patch wl1271-nvs.bin and replace 'deadbeef' with 00:.., TI > WLAN driver will attempt to read wl1271-nvs.bin, and if '00:00....' is > stored, it will automatically use wl18xx built-in MAC, which is unique for > every wireless chip produced by TI. Of course, this will only work for > wl18xx chips, but most wireless-capable Beaglebones come with wl18xx. > > In other words, if you patch wl1271-nvs.bin and replace 'deadbeef' with > '00:00:00..', or completely remove wl1271-nvs.bin, no other patches or > scripts will be required, and WLAN MAC will be assigned automatically.
Are you Serious? Jason? can you confirm with TI's wifi team? I'm about to jump on an airplane to Europe, but i'll throw a bbgw into my luggage and test this when i land tomorrow. If this works with all our wl1835 productions units, i'll pre-patch the firmware at image create time and rip out all the "eeprom/mac" hacks that waste boot time.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgDSg%3DLqMXa3LiX1P5G6ycUORcovq5brk9dXG4%3Dmn6q6w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.