That 4.14 kernal definitely improved the boot times compared to what I was 
seeing and what I posted 
here: https://github.com/RobertCNelson/boot-scripts/issues/10

However, I am still getting a boot time of close to a minute (~32 seconds 
for both *dev-mmcblk1p1.device* and *generic-board-startup.service*).

# systemd-analyze 
Startup finished in 21.569s (kernel) + 37.032s (userspace) = 58.602s

# systemd-analyze blame
         32.599s dev-mmcblk1p1.device
         31.957s generic-board-startup.service
          3.137s systemd-udev-trigger.service
          2.602s loadcpufreq.service
          2.090s networking.service
          1.638s ssh.service
          1.542s connman.service
          1.385s systemd-logind.service
          1.196s systemd-journald.service
          1.164s avahi-daemon.service
          1.158s udhcpd.service
           841ms dnsmasq.service
           833ms pppd-dns.service
           786ms bb-wl18xx-wlan0.service
           623ms cpufrequtils.service
           536ms systemd-timesyncd.service
           497ms rsyslog.service
           445ms wpa_supplicant.service
           416ms systemd-random-seed.service
           367ms systemd-udevd.service
           350ms kmod-static-nodes.service
           333ms systemd-modules-load.service
           314ms systemd-sysctl.service
           311ms systemd-user-sessions.service
           311ms hostapd.service
           304ms systemd-update-utmp.service
           303ms sys-kernel-debug.mount
           301ms sys-kernel-config.mount
           297ms systemd-remount-fs.service
           275ms systemd-tmpfiles-setup.service
           248ms systemd-journal-flush.service
           220ms media-sd.mount
           206ms systemd-tmpfiles-setup-dev.service
           191ms sys-fs-fuse-connections.mount
           185ms user@0.service

Can anything be done to really trim down the boot time to be not much more 
than the kernel boot time? And what does one sacrifice in doing so? A 30 
second boot would be great. This 60 boot isn't too bad, either, of course, 
thanks for your work on that kernel 4.14.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/d2b8dbe7-0931-44c9-a482-0e1df52699bb%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to