write a device overlay to do all of this then load it in /boot/uEnv.txt
On 2/26/2018 8:33 PM, salahgaf...@gmail.com wrote: > Thanks @Robert > > I could solve the issue by setting active_low value in > /sys/class/gpio/gpio66 > > But I think that's not the recommended method. > > Comments please!! > > On Friday, 23 February 2018 18:06:48 UTC+5:30, Salah Abdul Gafoor wrote: > > Hi, > > I want to configure some of my gpio pins (P8_07 to P8_10) of my > beagle bone black revC board as inputs with active high state. > > OS running in my board is Debian 9.3, with Kernel 4.1. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to beagleboard+unsubscr...@googlegroups.com > <mailto:beagleboard+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/4687d4f5-b329-4937-b246-ec8714c749b4%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/4687d4f5-b329-4937-b246-ec8714c749b4%40googlegroups.com?utm_medium=email&utm_source=footer>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/bbc6ff32-1a46-b67e-dd01-b0ff0d614ee6%40gmail.com. For more options, visit https://groups.google.com/d/optout.
