Once tested these bones will need to have a custom image flashed. I dont have this image so i cannot flash the bone. I can flash a new image if i need to.
I want to make sure that the board can be flashed and work from the EMMC once i send them off to never never land of customers. On 3/7/2018 8:03 AM, Robert Nelson wrote: > On Wed, Mar 7, 2018 at 9:00 AM, evilwulfie <evilwul...@gmail.com> wrote: >> how would one go about doing that from command line >> >> will this affect booting from EMMC > yeap. but that's not the issue you are facing... > > >> I just googled how to clear out EMMC and did not see anything related to >> that > sudo dd if=/dev/zero of=/dev/mmcblk1 bs=1M count=10 > >> >> BTW Welcome back Robert > yeah, Europe was a lot of fun.. ;) > > Regards, > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f8ccbc75-5ec3-f6a9-5023-665baf5260fe%40gmail.com. For more options, visit https://groups.google.com/d/optout.
