Mill-Max has a line of solder cup pins for discrete wire termination. The 8301 series has an 0.025 inch square pin.
https://www.mill-max.com/products/pin/8301 Mike Jaeger On Wed, Oct 17, 2018 at 3:05 PM Robert Nelson <robertcnel...@gmail.com> wrote: > On Wed, Oct 17, 2018 at 2:01 PM dwviel via BeagleBoard > <beagleboard@googlegroups.com> wrote: > > > > Almost. But, I was hoping that the end of the wire would have the > square gold plated pin attached. > > Like this variant: > > > https://www.digikey.com/product-detail/en/adafruit-industries-llc/826/1528-1162-ND/5353622 > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAOCHtYgdGYj6DEOkz5%3DGkvQUD-D2UT150WjiqBwB4SVBgpE9mg%40mail.gmail.com > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHqMqrgapBzVYZWGO6fuTbBi4drnGJjCuDcfdXQHnSJGEfz5Hw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
