On Tue, Feb 05, 2019 at 06:16:52PM -0800, Vince Seiferd wrote: > I am testing a new (to me) cape on Beaglebone Black which worked for two > days. The image is run on SDCARD. Suddenly I could not access the web on > the image and cannot SSH, no loss of IP connectivity. I can ping, I removed > the SD card and reset the BBB but same issues. I connected via USB and was > able to access the web and SSH through the RNDIS setup. Any ideas why I can > ping but cannot do anything else? How would I determine if hardware or > software? >
You can ping an Internet address, (e.g. 1.1.1.1) or you mean pinging one of your local addresses (e.g. 192.168.7.3). If it is the latter, then of course, you will not necessarily be able to connect to the Internet. The computer you are connected to must have Internet Connection Sharing enabled (I am guessing it is a Windows Computer ...) -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/20190207060815.GA22059%40Nokia-N900. For more options, visit https://groups.google.com/d/optout.