On Friday, 15 March 2019 16:07:57 UTC+2, Tarmo Kuuse wrote: > > Hi Neil, > > On Friday, 15 March 2019 03:31:48 UTC+2, neil.m...@gmail.com wrote: >> >> >> Hello all, >> >> I am currently working on implementing this project : >> >> http://www.ti.com/lit/ug/tiduci9c/tiduci9c.pdf >> >> I am using a Beagle Bone black wireless instead of the Beagle Bone >> black, and I am using a CC1310 Microcontroller from TI. >> >> Now , I am currently working on the following section in the above link: >> >> 3.1.2.1 BeagleBone Black SD Card. >> >> Here are the steps stated in that sections: >> >> 1. Download the prebuilt TI Linux processor SDK SD card image >> am335x-evm-linux-xx.xx.xx.xx.img.zip from >> http://software-dl.ti.com/processor-sdk-linux/esd/AM335X/latest/index_FDS.html >> (where >> xx.xx.xx.xx is the version number of the latest Linux Processor SDK). >> 2. To program the micro SD memory card, see the instructions in >> Processor SDK Linux Creating an SD Card with Windows >> >> When I navigate to link to try and find the correct image , I fould the >> one below to be the right one: >> >> am335x-evm-linux-05.02.00.10.img.zip >> <http://software-dl.ti.com/processor-sdk-linux/esd/AM335X/latest/exports/am335x-evm-linux-05.02.00.10.img.zip> >> Only >> used when creating an SD Card on Windows 1051208KHowever, the image is >> even over 16GB , and in the hardware requirements they say that 8gb MicroSD >> card is required. Is the above image the right one for this assignment? In >> case it is , then an 8GB MicroSD card is not big enough as specified in the >> assignment. If this is not the image I should be using , I would like some >> help please to find out which one it is. Thanks a lot. >> > > It seems to me that 1051208K is approximately 1 GB. > > Anyway - not knowing anything about images provided by TI - perhaps it > would be easiest to just try it out? >
Apologies, the uncompressed image is 16GiB. It looks like you might need a 32 GB SD card for this. -- Kind regards, Tarmo -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9461850b-1dcf-4046-99f0-e9a7784d7c7c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.