Graham, If you don't mind could you answer a few questions? You have parts on both sides of the board. Is this primarily because of the size constraint or to keep traces short as possible? Is it possible for the driver software to load the MAC address of the Beagle Bone into the LAN9500A? It does not appear that the preprogrammed MAC address EEPROMs from Microchip work with these USB-to-Ethernet chips.
On Sunday, August 4, 2019 at 8:43:23 AM UTC-5, Graham Haddock wrote: > > > https://github.com/phrogger/PocketBeagle_Ethernet_Cape > > https://oshpark.com/shared_projects/GOEnFXdS > > > > > [image: PB_LAN9500A.jpg] > > --- Graham > > > > On Saturday, August 3, 2019 at 9:11:50 PM UTC-5, Jason Kridner wrote: >> >> >> Do you have a pointer to the design files? >> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/413cbc25-f7d2-4c72-864a-461362ead1b8%40googlegroups.com.